We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Tier1 AP110 Comparable Whole House Sediment Water Filter
SKU
TIER1-AP110-934
Price $7.84 List Price Price $11.99 Save 34%
Availability: In Stock
Fits most standard 10 x 2.5-inch housings
- Ships fast!
- Installs quickly and easily
- Provides cleaner water throughout your home
- Bonded Polypropylene filter media helps capture particles 5 micron or larger
› See more product details
- Ships fast!
- Installs quickly and easily
- Provides cleaner water throughout your home
- Bonded Polypropylene filter media helps capture particles 5 micron or larger
The AP110 comparable Sediment Water Filter by Tier1 is ideal for 10 x 2.5-inch whole house water filtration systems. Reduce the dirt, sediment, rust, and corrosion that disrupt your home water use. This filter is slightly larger than the housing intentionally because it does not have washers or gaskets at the ends. The cap and base of the housing are designed to "cut" into the filter to create a seal. This filter will work for 10 x 2.5-inch filter housings once the housing sump head has been tightened. Enjoy filtered water with your replacement AP110 comparable whole house sediment water filter.
Experience the Tier1 Difference
Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:
- Guaranteed Fit
- Guaranteed Quality
- Guaranteed Price
Reduced Contaminants
The TIER1-AP110-934 reduces the following contaminants:
- Dirt
- Oxidized Iron
- Particles
- Rust and Corrosion
- Sediment
The TIER1-AP110-934 is comparable with the following part numbers
9547 | 9577 | 9591 | 9747 |
12461 | 13110 | 17367 | 56204.06 |
173884 | 1227867 | 5541014 | 155014-52 |
3M Cuno AP110 | 3M CUno CFS110 | 529-286 | 55410-14 |
55410-15 | 55410-16 | 56121-11 | AQUAPURE AP-110 |
CFS110 | W5P | WHCF-DWHV | WHCF-GD05 |
WHKF-DWHV | WHKF-GD05 | RB-AP-110 |
The TIER1-AP110-934 fits the following model numbers
AP101 | AP101S | AP101-S | AP101T |
AP101-T | AP102 | AP102S | AP102-S |
AP102T | AP102-T | AP11 | AP110 |
AP-110 | AP11S | AP11-S | AP11T |
AP11-T | AP12 | AP12S | AP12-S |
AP12T | AP12-T | AP1610 | AP1610SS |
AP1610-SS | AP2610 | AP2610SS | AP2610-SS |
AP51T | AP51-T | K00173 | Purtrex 93023 |
PX05-9-7-8 | PX-5-978 | SS1 | SS10 |
SS11 | SS12 | SS2 | SS3 |
SS4 | SS5 | SS6 | SS7 |
SS8 | SS9 | CULLIGAN-HF-150 |
Instructions
- Turn off water supply. Press red pressure-relief button (if present)
- Unscrew housing. Remove large o-ring, wipe clean and set aside
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
- Insert new filter cartridge
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation