X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

K2528-KK Omnipure GAC Inline Water Filter

SKU
OMNIPURE-K2528-KK
Price $18.99 List Price Price $27.99 Save 32%
Availability: Discontinued
Fits standard 3/8-inch water lines
  • Ships fast!
  • Tested and certified to NSF/ANSI Standard 42 for reduction of Chlorine, Class 1 and Taste and Odor
  • Replace filter every 1500 gallons (about 12 months) or if you notice a drop in pressure
  • Quick Connect fittings are molded directly into the filter to reduce the chances of a leaky installation
› See more product details
The K2528-KK filter by Omnipure is an inline filter designed for the reduction of chlorine taste and odor using Granular Activated Carbon (GAC) mesh filtration media. Built to attach easily onto standard 3/8-inch water lines thanks to Quick Connect fittings located on each end of the filter. Inline filters are ideal for many point-of-use applications such as ice makers, refrigerators, and pre-filtration for reverse osmosis systems. Order the K2528-KK Omnipure GAC Inline Water Filter today!
More Information
Package Qty 1
Used In Brands Omnipure
Manufacturer's Id K2528-KK
UPC 799932587498
Advertised Size (in) 10 x 2
Actual Size (in) 10 inches (length) x 2 inches (outside diameter)
Actual Size (cm) 25.4 x 5.08
Outside Diameter (inches) 2
Mesh Size 20 x 50
Media GAC Mesh
Primary Filter Media Granular Activated Carbon
Filter Life (gallons) 1500
Filter Life (liters) 5678.12
Filter Life (months) Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x 12 months
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 35 - 100
Operating Temperature (°C) 1.7 - 37.8
Flow Rate (gpm) Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x 0.5
Flow Rate (lpm) 1.893
Fitting Type Quick Connect
Fitting Size (inches) 3/8 inch
Country of Manufacture United States
Additional Information Volume: 18.5 Cu. In.
Certifications Voluntary national standards that establish minimum requirements for the safety and performance of filtration equipment.x Voluntary national standards that establish minimum requirements for the safety and performance of filtration equipment.x NSF/ANSI Standard 42

Reduced Contaminants

The OMNIPURE-K2528-KK reduces the following contaminants:

  • Bad Taste and Odor
  • Chlorine Taste & Odor
  • Odor

The OMNIPURE-K2528-KK is comparable with the following part numbers

CL10ROT28
K2528KK
K2528-KK
K2536KK
K2536-KK

Instructions

  1. Note the direction of the filter
  2. Push scratch-free tube end into fitting until it stops
  3. Flush new cartridges with 5 gallons before use. During this time, check for leaks.
  4. If leaks occur, check to see if tubings and fittings are the correct tightness. If leaks continue, discontinue use and call supporting dealer
  5. Replace after 1500 gallons or when flow becomes too slow
  6. NOTE: Install in accordance to state and local laws and regulations