X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

40 inch x 2.5 inchWhole House Sediment Water Filter by Tier1 (25 Micron)

SKU
TIER1-P25-40
Price $17.99 List Price Price $25.99 Save 30%
Availability: In Stock
Only 5 left
Fits 40 x 2.5 inch housings
  • Ships fast!
  • Perfect for commercial applications
  • Resistant to bacteria due to the polypropylene material
  • Ensures a greater dirt holding capacity than string wound filters
› See more product details
  • Ships fast!
  • Perfect for commercial applications
  • Resistant to bacteria due to the polypropylene material
  • Ensures a greater dirt holding capacity than string wound filters
The 40 inch x 2.5 inch whole house sediment water filter by Tier1 (25 Micron) (TIER1-P25-40), captures medium to fine sediment. The spun wound media captures more dirt than string wound options. The large size of this filter, ensures greater surface area, and is perfect for commercial applications. In addition this filter is both bacteria and chemical resistant, able to withstand various types of fluids such as acids and alkalis. Order today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
More Information
Package Qty 1
Used In Brands Hydronix, Tier1
Manufacturer's Id P25-40
UPC 799932619878
Advertised Size (in) 40 x 2-1/2
Actual Size (in) 40 inches (length) x 2-1/2 inches (outside diameter)
Actual Size (cm) 101.6 x 6.35
Outside Diameter (inches) 2.5
Media Type Sediment Filter
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x 6 months
Micron Rating (Nominal) The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x 25
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x 20
Flow Rate (lpm) 75.7082
Warranty Guarantee Unconditional Product Guarantee for Life of the Product

Reduced Contaminants

The TIER1-P25-40 reduces the following contaminants:

  • Dirt
  • Particles
  • Sediment

The TIER1-P25-40 is comparable with the following part numbers

SDC-25-4025
SDF-25-4025

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge
  4. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  5. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  6. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  7. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  8. Insert new filter cartridge
  9. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  10. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation