X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

SDC-25-2010 Hydronix Whole House Replacement Sediment Filter Cartridge

SKU
HYDRONIX-SDC-25-2010
Price $12.99 List Price Price $18.99 Save 31%
Availability: Discontinued
Fits most housings that accept 20-inch x 2.5-inch water filter cartridges
  • 10 micron sediment filter for cleaner water
  • Graded density for higher dirt holding capacity
  • For optimum dirt-holding, replace about every 2-3 months
  • Materials ANSI/NSF Standard 42 tested and certified
› See more product details
The Hydronix SDC-25-2010 sediment water filter is a 100% pure polypropylene cartridge. It is a perfect pre-filter for reducing sand, silt, rust and scale, and is a compatible replacement cartridge for many brands of 20-inch standard sediment filters.
More Information
Package Qty 1
Used In Brands Hydronix
Manufacturer's Id SDC-25-2010
UPC 799705708068
Advertised Size (in) 20 x 2-1/2
Media Type Sediment Filter
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x Filter's should be replaced based on usage and filter condition. Filter life is an estimation of expected performance based on typical filtration conditions.x 3 months
Micron Rating (Nominal) The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x The smallest size at which particles are retained by the filter. One micron is equivalent 1/1000th of a millimeter.x 10
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x Flow rate is the volume of water that passes through a filtration system measured in gallons per minute. A filter's flow rate indicates the maximum recommened flow for optimum filter performance. x 10.00
Flow Rate (lpm) 38.00
Additional Information Recommended Replaceable Pressure Drop: 21.75 PSI (1.5 kg/cm2), Maximum Pressure Drop: 69 F (20 C) 46.4 psi (3.2 kg/cm2), Initial Pressure Change @ Flow: 0.3 psi at 10 gpm

The HYDRONIX-SDC-25-2010 is comparable with the following part numbers

93046 94252 155757 1193046
1194252 1227870-V 155757-43 GX10-20
PD-10-20 PX10-20 SD-25-2010 SDC-25-2010
VX10-20

Instructions

  1. Each time you replace your filter, clean and inspect the o-ring in between the housing cap and sump
  2. If there is any damage to the o-ring replace it
  3. After cleaning the o-ring apply a silicone lubricant, like OR-LUBRICANT-SM (purchasable separately)
  4. You must use a silicone food grade lubricant--all other types of lubricant could damage the o-ring
  5. Silicone lubricant prevents leaking and extends the life of the o-ring