AP Easy Complete 3M™ Aqua-Pure™ Under Sink Dedicated Faucet Replacement Water Filter Cartridge

Price $209.99
Availability: In stock
Fits most standard water lines and connects to a dedicated drinking water faucet (included)
  • Each cartridge provides 750 gallons of filtered water
  • Advanced dual stage carbon-block filtration process to help provide cleaner, clearer better tasting drinking water
  • Built-in bypass valve eliminates having to shut-off water to the faucet while changing cartridges while allowing unfiltered water to flow to dedicated faucet during cartridge change-out
  • Reduces particulate, chlorine taste and odor, asbestos, parasitic protozoan cysts, lead, mercury, atrazine, benzene, carbofuran, lindane, p-Dichlorobenzene and toxaphene
See more product details
TheAP Easy Complete 3M™ Aqua-Pure™ Under Sink Dedicated Faucet Replacement Water Filter includes the valve head and filter cartridge, making the system ready for use right out of the box. Backed by Aqua-Pure quality, each filter has a 750 gallon filter life, depending water quality. Each filter reduces a wide range of contaminants including chlorine taste and odor, sediment, microorganisms, heavy metals, and VOCs. NSF standard 42 and 53 certified to give you confidence Order today!
Package Qty 1
UPC 50051128889157
Actual Size (in) 12 1/2 inches (height) x 2 3/8 inches (width)
Actual Size (cm) 31.75 x 6.0325
Filter Life (gallons) 750
Filter Life (liters) 2,839.06
Filter Life (months) 6 months
Operating Pressure (psi) 25 - 125
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Flow Rate (gpm) 0.75
Flow Rate (lpm) 2.84
Fitting Type Push In
Fitting Size (inches) 1/4 inch


  1. Turn off cold water supply valve and remove existing water supply tubing and/or fitting
  2. Select and mark a location under the sink that allows access for filter change. Using filter head/bracket as a guide, fasten Filter Head Assembly to wall with number 2 Phillips mounting screws supplied
  3. Mark hole locations so that there is a 1-1/2 inch space between the screws from center of each screw
  4. When installed, filter bottom should be at least 2-1/2 inches from sink cabinet floor to facilitate cartridge change
  5. Install screws, but only halfway, so you can easily slip the bracket to wall before firmly setting screws
  6. Determine length of tubing required from filter head/bracket to faucet and from water supply line to filter head/bracket by holding tubing in place ensuring it is of appropriate length (do not kink tubing)
  7. Cut tubing straight with a utility knife. Locate the cold water stem on the underside of the faucet fixture
  8. Unscrew the cold water feed tube from the faucet stem. Locate the 1/4-inch Feedwater Adapter that came with your Drinking Water System
  9. Insert the black gasket into the threaded adapter and tighten onto the Faucet Cold Water Stem under the sink, making sure that 1/4-inch fitting is accessible and not facing the wall (make sure not to overtighten)
  10. Take the Cold Water Feed Tube and attach to the Faucet Adapter, making sure not to overtighten. Locate the 1/4-inch Blue Tubing and insert into the 1/4-inch Faucet Adapter

Reset Instructions