The Pentek NCP-10 features a 10-micron nominal rating. Its pleated cellulose-polyester media with a carbon-impregnated core is specifically engineered to reduce chlorine taste and odor while filtering out sediment, dirt, rust, and scale particles 10 microns and larger. This dual-action design makes the NCP-10 ideal for point-of-use applications where both particulate and chlorine reduction are needed in a single cartridge.

The Pentek NCP-10 has a recommended service life of approximately 6 months or up to 10,000 gallons, whichever comes first, under typical residential usage. However, actual filter life depends on your incoming water quality, sediment load, and chlorine levels. If you notice reduced flow rate or a return of chlorine taste/odor, replace the cartridge sooner to maintain optimal performance.

The Pentek NCP-10 measures 9-3/4" in length with a 2-5/8" outer diameter, making it compatible with standard 10-inch Slim Line filter housings. It operates within a temperature range of 40–100°F (4.4–37.8°C) and a maximum pressure of 125 psi. The NCP-10 fits Pentek Slim Line housings and other standard 10" SL systems, making it a drop-in replacement for many under-sink filtration setups.

The Pentek NCP-10 is manufactured in a facility that follows quality standards aligned with NSF/ANSI guidelines, though specific certification should be verified on the current product datasheet. The cartridge is designed to reduce chlorine taste and odor, sediment, sand, silt, rust flakes, and scale particles. Its carbon-impregnated cellulose-polyester pleated media provides higher dirt-holding capacity than standard spun filters, extending usable life in sediment-heavy water supplies.

The Pentek NCP-10 supports a service flow rate of up to 3 GPM (gallons per minute) when used in a compatible 10" Slim Line housing. For installation, shut off the cold water supply, depressurize the line, remove the existing cartridge from the housing sump, insert the NCP-10 with the open end facing up (or as directed by your housing), and re-secure the sump. Flush the new filter for 3–5 minutes before use to clear any loose carbon fines and ensure clean, great-tasting water.