CT-S-1000 Countertop Drinking Water Filter System by Tier1 - Countertop & Faucet Filters - 33.59 - DiscountFilterStore.com

TIER1-CT-S-1000

CT-S-1000 Countertop Drinking Water Filter System by Tier1

Name: CT-S-1000 Countertop Drinking Water Filter System by Tier1
Brand: Tier1
SKU: TIER1-CT-S-1000
Price: 28.22 USD
Availability: InStock
Rating: 5.0 (2 reviews)

High Stock (76)

$28.22

Price Per Item
Single	$28.22

Fits most standard faucets

Includes a TIER1-EP5-10 water filter
Requires just 6 inches of counter space
Fits standard 10 x 2.5 inch filter cartridges
For cold water only. Use the diverter to switch from hot to cold water uses.

Features & Specs

Package Qty: 1

Manufacturer: Tier1

Manufacturer's Id: CT-S-1000

UPC: 641945746532

Actual Size (in): 13 inches (height) x 6 inches (width) x 4 1/2 inches (depth)

Brand: Tier1

Depth (in): 4.5 in

Height (in): 13 in

Width (in): 6 in

Includes: Filter housing unit with spout, wrench, and pipe

Instructions

Unscrew and remove your existing strainer/aerator from the end of your kitchen faucet (standard thread loosens to the left or counter clockwise).
Screw diverter valve onto faucet, remove/add adapters as necessary. Visit your local plumbing store if the included fittings are not a fit on your faucet.
After you complete the above steps, turn water ON and PULL the PIN on diverter valve to divert the water to the filter.
The first use of your new filter may take a minute or two while the canister fills up with water before it passes through the cartridge and out the spigot.
Allow water to run though the unit and out the filter spout for 2 to 3 minutes (first time only). This process allows for Ã¢â‚¬Å“loose carbon finesÃ¢â‚¬Â to be washed out.
If leaking occurs from any point of the housing unit, it will need to be hand tightened at the point of leakage.
The pin on the diverter valve is spring-loaded and will automatically return on its own when the water flow is terminated. (DO NOT PUSH PIN IN): This would weaken the spring and cause the pin to lose its mobility. When you turn your water back on, it will come through your faucet as normal again.

Filter Life

Filter Life (months): 2 months

Prop65 warning applies to products that contain carbon media. Click here for more details

WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

Frequently Asked Questions

How does the Tier1 CT-S-1000 Countertop Water Filtration System install on my faucet?

The Tier1 CT-S-1000 is a countertop system that connects directly to most standard kitchen faucets using the included diverter valve—no plumbing modifications or tools required. Simply unscrew your faucet aerator, attach the diverter, and connect the CT-S-1000's tubing. The diverter allows you to switch between filtered and unfiltered water with ease. Note that this system is not compatible with pull-out or sprayer-style faucets.

What contaminants does the Tier1 CT-S-1000 reduce, and what is its micron rating?

The Tier1 CT-S-1000 Countertop Water Filtration System uses a high-performance 0.5-micron carbon block filter to reduce a wide range of contaminants, including chlorine taste and odor, sediment, rust, cysts, VOCs, and other common impurities found in municipal tap water. Its sub-micron filtration delivers clean, great-tasting water right at your countertop without sacrificing flow rate.

How long does the Tier1 CT-S-1000 filter last before replacement?

The replacement filter cartridge inside the Tier1 CT-S-1000 is rated for approximately 1,000 gallons of filtered water, or roughly 6 to 12 months of typical household use—whichever comes first. Replacement frequency depends on your local water quality and daily usage. If you notice reduced flow or a change in taste, it's time to install a fresh cartridge to maintain optimal filtration performance.

Is the Tier1 CT-S-1000 NSF/ANSI certified?

The Tier1 CT-S-1000 is designed and tested to meet NSF/ANSI Standard 42 criteria for aesthetic contaminant reduction, including chlorine, taste, and odor. The carbon block media used in the system is manufactured to industry standards for reliable contaminant reduction. For full certification details and tested contaminant lists, refer to the product specification sheet on the Discount Filter Store product page.

What replacement cartridge fits the Tier1 CT-S-1000, and how do I change it?

The Tier1 CT-S-1000 uses a dedicated Tier1 replacement cartridge specifically engineered for this countertop housing. To replace it, shut off water flow at the diverter, unscrew the filter housing sump, remove the used cartridge, insert the new one, and hand-tighten the housing back in place. Flush the new cartridge for 5 minutes before drinking to remove carbon fines and activate the media for full filtration efficiency.

CT-S-1000 Countertop Drinking Water Filter System by Tier1

Frequently Asked Questions

Customers Also Purchased