Refrigerator Filters
  • Whole House Filtration
  • Air Filters
  • Water Filters
  • PENTEK-BBF1-20MB

    BBF1-20MB Pentek Whole House Filter Replacement Cartridge

    High Stock (15)
    Fits any standard housing that uses 20-inch x 4 1/2-inch filter cartridges

    Your Product Purchase Options
    No available purchase options for this selection.
    Deliver Every:
    • 99% Hydrogen conversion and 95% Hydroxide conversion

    • 1850 Grain capacity with 20-40 screen size (US Std. Mesh)

    Features & Specs
    Package Qty: 1
    Manufacturer: Pentair Water
    Manufacturer's Id: BBF1-20MB
    UPC: 051678281031
    Actual Size (in): 20 inches (length) x 4 1/2 inches (outside diameter)
    Media: Mixed Bed DI Resin
    Primary Filter Media: Mixed Bed DI Resins
    Operating Temperature (°F): 40 - 100
    Operating Temperature (°C): 4.4 - 37.8
    Brand: Pentek
    Advertised Size: 20 x 4-1/2
    Length (in): 20 in
    Outside Diameter (in): 4.5 in
    Width (in): 4.5 in
    Materials of Construction: Gasket: Buna-N
    Media Type: Specialty Filter
    UPC's For Search: 10051678281038
    Country of Origin: China
    Micron Rating Nominal: 30
    Flow Rate (gpm): 1.25
    Includes: One 20 x 4-1/2 Inch Pentek BBF1-20MB Mixed Bed Deionization Water Filter
    Instructions
    1. Turn off water supply. Press red pressure-relief button (if present).
    2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
    3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
    4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
    5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
    6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
    7. Insert new filter cartridge.
    8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
    9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.
    Downloads
    Contaminants Reduced
  • Dirt
  • Sand
  • Sediment
  • Silt
  • Solids
  • Total Dissolved Solids (TDS)
  • Filter Life
    Filter Life (months): 6 months

    The PENTEK-BBF1-20MB filter cartridge was developed to help meet requirements for deionized water. Manufactured with FDA-compliant resin these high-capacity, semi-conductor-grade resin cartridges are ideal for use in many industries where low levels of total organic carbon (TOC) and total dissolved solids (TDS) are required.


    PENTEK-BBF1-20MB   is comparable with the following part number(s)

    • 155281-43
    • BBF1-20MB
    • PENTEK-BBF1-20MB