Warranty Info
Warranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
TIER1_FHR_10_45_SEDIMENT_KIT
DGD-5005 155357-43 Pentek Spun Polypropylene Filter Cartridge Comparable Replacement Kit with O-ring and Lubricant by Tier1 (10 inches x 4-1/2 inches)
High Stock (458)
$18.40
Features & Specs
Features & Specs
Package Qty: 3
Manufacturer: Tier1
Manufacturer's Id: FHR-10-45-SEDIMENT
UPC: 641945752298
Actual Size (in): 9 7/8 inches (length) x 4 1/4 inches (outside diameter)
Primary Filter Media: Polypropylene
Operating Temperature (°F): 40 - 145
Operating Temperature (°C): 4.4 - 62.8
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Brand: Tier1
Advertised Size: 10 x 4-1/2
Depth (in): 4.25 in
Length (in): 9.88 in
Outside Diameter (in): 4.25 in
Width (in): 4.25 in
Media Type: Sediment Filter
Micron Rating Nominal: 5
Flow Rate (gpm): 10.0
Includes: DGD-5005 Pentek Comparable Replacement Filter, O-ring, and Lubricant
Instructions
Instructions- Turn off water supply. Press red pressure-relief button (if present)
- Discard used filter cartridge
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
- Insert new filter cartridge
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
Replacement Parts
Replacement Parts
Contaminants Reduced
Contaminants Reduced
Filter Life
Filter Life
Filter Life (months): 6 months
Warranty Info
Warranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
The 10 x 4.5 inch polypropylene filter replacement kit by Tier1 includes everything you need for filter change maintenance. The exclusive kit includes a 5 micron polypropylene DGD-5005 Pentek comparable filter, replacement O-ring and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and component you need to finish the job. Water taste and quality is critical business, the DGD-5005 Pentek comparable filter by Tier1 reduces dirt, rust and corrosion while it captures sediment as small as 5 microns. The system installs quickly and easily, order today!