We use cookies to make your experience better.
CW-50 Pentek Comparable Whole House Sediment Water Filter by Tier1
SKU
TIER1-CW50-934
Price $10.99 List Price Price $15.99 Save 31%
Availability: BackOrder
Fits most standard 10 x 2.5-inch housings
- String Wound Polypropylene filter media helps capture particles 50 micron or larger
- Ensures quality water throughout your home
- Easy installation for a frustration-free return to better water
› See more product details
- String Wound Polypropylene filter media helps capture particles 50 micron or larger
- Ensures quality water throughout your home
- Easy installation for a frustration-free return to better water
The CW-50 Pentek Comparable Whole House Sediment Water Filter by Tier1 reduces the sand, dirt, silt, rust, and scale particles that plague your water. The String Wound Tier1 CW50-934 is an ideal solution for many of the most common water filtration needs. First time and veteran users alike can experience this excellent product with the protection of a 30 day 100% satisfaction guarantee. Order today!
Experience the Tier1 Difference
Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:
- Guaranteed Fit
- Guaranteed Quality
- Guaranteed Price
Package Qty | 1 |
---|---|
Used In Brands | 3M, Ace, American Plumber, Ametek, Aqua-Pure, Culligan, GE, Hydronix, Keystone, Liquatec, Pentek, Tier1, Watts |
Manufacturer's Id | CW50-934 |
UPC | 700355941088 |
Advertised Size (in) | 10 x 2-1/2 |
Actual Size (in) | 9-3/4 inches (length) x 2-1/2 inches (outside diameter) |
Actual Size (cm) | 24.765 x 6.35 |
Outside Diameter (inches) | 2.5 |
Media | String Wound Polypropylene |
Primary Filter Media | Polypropylene |
Filter Life (gallons) | 16,000 |
Filter Life (liters) | 60,566.6 |
Filter Life (months) | 6 months |
Micron Rating (Nominal) | 50 |
Operating Temperature (°F) | 40 - 165 |
Operating Temperature (°C) | 4.4 - 73.9 |
Flow Rate (gpm) | 10 |
Flow Rate (lpm) | 37.8541 |
Country of Manufacture | China |
Warranty Guarantee | Unconditional Product Guarantee for Life of the Product |
Reduced Contaminants
The TIER1-CW50-934 reduces the following contaminants:
- Coarse Sand
- Hard Scale
- Limescale
- Oxidized Iron
- Particles
- Sand
The TIER1-CW50-934 is comparable with the following part numbers
155214-43 | 155214-52 | American Plumber W50W | Culligan CW-50 |
CW-50 | Pentek CW-50 | PENTEK-CW-50 | W30W |
W34-PR | W50W | W5W | WC34-PR |
WVC34 | RB-AP-110 |
The TIER1-CW50-934 fits the following model numbers
AP101 | AP101S | AP101-S | AP101T |
AP101-T | AP102 | AP102S | AP102-S |
AP102T | AP102-T | AP11 | AP110 |
AP-110 | AP11S | AP11-S | AP11T |
AP11-T | AP12 | AP12S | AP12-S |
AP12T | AP12-T | AP1610 | AP1610SS |
AP1610-SS | AP2610 | AP2610SS | AP2610-SS |
AP51T | AP51-T | K00173 | Purtrex 93023 |
PX05-9-7-8 | PX-5-978 | SS1 | SS10 |
SS11 | SS12 | SS2 | SS3 |
SS4 | SS5 | SS6 | SS7 |
SS8 | SS9 | CULLIGAN-HF-150 |
Instructions
- Turn off water supply. Press red pressure-relief button (if present)
- Unscrew housing. Remove large o-ring, wipe clean and set aside
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
- Insert new filter cartridge
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation