DGD-5005-20 Comparable 155358 Pentek Spun Polypropylene Filter Cartridge Replacement Kit with O-ring and Lubricant by Tier1

SKU
TIER1_FHR_20_45_SEDIMENT_KIT
Price $26.99

Availability: In stock

Price as configured $26.99

  • Ships fast!
  • Includes filter, o-ring and lubricant packet
  • Manufactured for performance, priced for value
  • Tier1 filters are big on performance, not on price
See more product details
The 20 x 4.5 inch polypropylene filter replacement kit by Tier1 includes everything you need for filter change maintenance. The exclusive kit includes a 5 micron polypropylene DGD-5005-20 Pentek comparable filter, replacement O-ring and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and component you need to finish the job. Water taste and quality is critical business, keep your water clean with the DGD-5005-20 Pentek comparable filter by Tier1. This kit reduces dirt, rust and corrosion while it captures sediment as small as 5 microns. The system installs quickly and easily, order today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-20-45-SEDIMENT
UPC 641945752359
Advertised Size (in) 20 x 4-1/2
Actual Size (in) 20 1/8 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 51.1175 x 11.43
Primary Filter Media Polypropylene
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 20
Flow Rate (lpm) 75.7082
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes DGD-5005-20 Pentek Replacement Filter, O-ring, and Lubricant
Primary Filter Media Polypropylene

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions