X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

ECP1-10 Pentek Comparable Whole House Filter Replacement Cartridge by Tier1

SKU
TIER1-ECP1-10
Price $10.99 List Price Price $15.99 Save 31%
Availability: In Stock
Fits most 10x2.5 housings
  • The pleated cartridge, allows the product to be reusable, simply rinse off once during the filters lifespan
  • Added strength polypropylene core
  • Easy to install and conveniently sized for undersink housings
  • Only use on chlorinated water supplies
› See more product details
  • The pleated cartridge, allows the product to be reusable, simply rinse off once during the filters lifespan
  • Added strength polypropylene core
  • Easy to install and conveniently sized for undersink housings
  • Only use on chlorinated water supplies
The ECP1-10 Pentek Comparable Whole House Filter Replacement Cartridge by Tier1 is a 1 micron pleated cellulose filter, ensuring the filtration of small hard to get particles. You will only need to change this filter out once every six months. The flow rate of this filter is rated at 10 gallons per minute. In addition this filter has added strength due to it's rugged polypropylene core. Very effective and easy to install, simply fit this filter into your undersink housing sized 10x 2.5 inches, then connect your water line to the housing. Due to the presence of cellulose in the material only use this particular filter on chlorinated water supplies. Order yours today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty1
Used In BrandsPentek
Manufacturer's IdTIER1-ECP1-10
UPC641945742398
Advertised Size (in)10 x 2-1/2
Filter Life (months)6 months
Micron Rating (Nominal)1
Operating Temperature (°F)40 - 125
Flow Rate (gpm)10
Country of ManufactureChina

Reduced Contaminants

The TIER1-ECP1-10 reduces the following contaminants:

  • Dirt
  • Limescale
  • Sand
  • Sediment

The TIER1-ECP1-10 is comparable with the following part numbers

PENTEK-ECP1-10
255481-43
25548143

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge
  4. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  5. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  6. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  7. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  8. Insert new filter cartridge
  9. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  10. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation