We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
EPM-20BB Pentek Comparable Whole House Water Filter by Tier1
SKU
TIER1-EPM4-20BB
Price $44.72 List Price Price $63.99 Save 30%
Availability: In Stock
Only 2 left
Fits most standard 20 x 4.5-inch housings
Choose a quantity
1 filter $44.72 2 filters $44.85 each 3 filters $34.90 each
- Ships fast!
- Filters microns down to 10 microns
- Reduces chlorine taste and odor, dirt, sand and sediment
› See more product details
- Ships fast!
- Filters microns down to 10 microns
- Reduces chlorine taste and odor, dirt, sand and sediment
The EPM-20BB Pentek Comparable Whole House Water Filter by Tier1 is ideal for 20 x 4.5 inch municipal or well water applications that require reductions of dirt, sand, sediment, chlorine taste and odor. Powder Activated Carbon Block filter media provides contaminant reduction with a nominal micron rating of 10. The highest carbon block dirt holding capacity at maximum cartridge life; Order today!
Experience the Tier1 Difference
Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:
- Guaranteed Fit
- Guaranteed Quality
- Guaranteed Price
Reduced Contaminants
The TIER1-EPM4-20BB reduces the following contaminants:
- Chlorine Taste & Odor
- Dirt
- Sand
- Sediment
The TIER1-EPM4-20BB is comparable with the following part numbers
EPM4-20BB |
PENTEK-EPM-20BB |
CULLIGAN-EPM-20BB |
AMETEK-155783 |
EPM-20BB |
Instructions
- Turn off water supply. Press red pressure-relief button (if present).
- Unscrew housing. Remove large o-ring, wipe clean and set aside.
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
- Insert new filter cartridge.
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.