Free Shipping on Orders Over $39* | Free Returns | No Worries Guarantee | Contact Us
Search
My Cart

FS-1-100STSS Rusco Replacement Steel Sediment Trapper Filter

SKU
RUSCO-FS-1-100STSS
Loading...
Price $25.99
Availability: In stock
100 mesh, 152 micron and built to fit a 1-inch pipe
  • Ships fast!
  • Easy to install and maintain
  • Reduces heavy sediment from your water for up to one full year
› See more product details
For up to one full year after installation, the FS-1-100STSS Rusco sediment trapper filter will reduce virtually all heavy sediment from your home’s water, improving your water quality and helping to preserve the life of your appliances. Designed for maximum performance and affordability, this filter can be easily cleaned and reused multiple times before being replaced. Genuine OE part, 100 mesh, 152 micron and engineered to fit a 1-inch pipe. Order the FS-1-100STSS Rusco replacement steel sediment trapper filter from us by 4pm CST today for same-day shipping.
Package Qty 1
Used In Brands Rusco
Manufacturer's Id FS-1-100STSS
UPC 659498005365
Advertised Size (in) 11-3/8 x 5
Actual Size (in) 5 1/2 inches (length) x 1 inch (outside diameter)
Actual Size (cm) 13.9 x 2.54
Mesh Size 100
Media Stainless Steel Screen
Primary Filter Media Spindown
Micron Rating (Nominal) 152
Fitting Size (inches) 1 inch
Color White

Instructions

  1. After you have installed your Rusco system, you can simply turn the flush valve parallel with the system when you notice excessive buildup of sediment
  2. You should clean your filter screens every few months and replace them every 6-12 months depending on your water usage
  3. The primary method of cleaning the Rusco filter is purging separated solids through the flush valve while the filter is under system pressure (can be done manually with the flush valve or automated with the optional Automatic Flush Valve)
  4. The filter element may need to be removed and cleaned
  5. To remove the filter element turn off the water supply and drain water pressure
  6. Unscrew the clear cover and remove the filter element
  7. Wash off collected sediment by spraying with water
  8. Remove fine particles wedged in the screen with a soft brush
  9. Apply silicone grease to o-rings, if needed, and reassemble
  10. HAND TIGHTEN ONLY

Reset Instructions