We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
1.5 LB GreenStory Global Cyanuric Acid CYA Remover GSG-CYA-1.5
- 1.5 lb bag for high levels of CYA and/or large pools over 10,000 gallons
- Saves time, money, and water by reducing CYA levels without the need to drain your pool.
- For best results run the pool pump 24 hours a day, CYA levels will drop by about 10 ppm per week.
- Fits inside pool skimmer basket to reduce CYA levels in your pool.
- 1.5 lb bag for high levels of CYA and/or large pools over 10,000 gallons
- Saves time, money, and water by reducing CYA levels without the need to drain your pool.
- For best results run the pool pump 24 hours a day, CYA levels will drop by about 10 ppm per week.
- Fits inside pool skimmer basket to reduce CYA levels in your pool.
Why is too much CYA a Problem?
CYA (Cyanuric acid) is a chlorine stabilizer and buffer commonly used to maintain chlorine levels in swimming pools, and some stabilized chlorine tablets like Trichlor and Dichlor tablets have CYA mixed directly in with the chlorine. This can become a problem if the CYA level rises above the 30-50 ppm as too much CYA will prevent chlorine from effectively sanitizing the water leading to an increase in bacteria, algae, and cloudiness of the water.
Historically the most effective way to reduce the level of CYA in your pool was simply to drain the pool halfway or more and fill it back up to dilute the concentration of CYA remaining. This could be a costly and time consuming process, and some states will even ban refilling pools due drought conditions making it almost impossible to correct elevated CYA levels. GreenStory Global's CYA remover uses a special filtration resin to remove CYA from the water without needing to drain the pool.
Keys to Success:
- Switch to liquid chlorine or chlorine product with no stabilizer in it.
- Run the pool pump 24 hours a day, or as much as possible. (CYA is removed from the water by contact with the pouch, so water needs to circulate to be effective.)
- Pool pump must run at a minimum of 4-6 gallons per minute.
- Adjust your pH to the proper range of 7.2 - 7.6
Package Qty | 1 |
---|---|
Manufacturer's Id | GSG-CYA-1.5 |
MSDS Document | SDS-GSG-P&S-CYA-Remover.pdf |
Media Weight (oz) | 24 |
Actual Size (in) | 7 inch (diameter) x 1.5 inch (height) |
Outside Diameter (inches) | 7 |
Primary Filter Media | CYA Selective Resin |
Country of Manufacture | United States |
User Guide
Instructions
- Drop your CYA Remover Pouch in the skimmer basket.
- Adjust your pH, if necessary, so that it falls in the 7.2 - 7.6 range.
- Stop using any chlorine with stabilizer. Switch to bleach or shock while using the CYA Remover filter.
- Run your pump 24 hours/day, or as much as possible (It's all about contact time with this filter!) with a flow of at least 4-6 gpm (average flow rate of a garden hose, for comparison)
- Use CYA test strips that test as high as 250 - 300 ppm, such as LaMotte, Aqua-Check, or Taylor. Check your CYA levels once a week. Your CYA levels should come down at the rate of 10-20 ppm/week on average, depending on pool conditions.
- When the pool reaches your desired CYA level, simply toss the bag in the garbage.