DGD-5005 Pentek Whole House Filter Replacement Cartridge by Tier1

Price $13.99
Availability: In stock
Fits filtration system housings that accept 10 x 4.5 inch cartridges
Choose a quantity
  • 1 Filter $13.99  
  • 2 Filters Price $13.57 each
  • 3 Filters Price $13.16 each
  • 4 Filters Price $12.97 each
  • 6 Filters Price $12.59 each
  • 12 Filters Price $10.49 each
  • 25 Filters Price $9.79 each
  • 50 Filters Price $9.09 each
  • Ships fast!
  • Filters sediment down to 5 micron
  • Provides the highest quality, great tasting water
  • Tier1 filters are big on performance, not on price
See more product details
The DGD-5005 Pentek Whole House Filter Replacement Cartridge by Tier1 is built to reduce virtually all types of sediment 5 micron or larger. The DGD-5005 Pentek Whole House Filter Replacement Cartridge by Tier1 will fit easily into any system that uses 10x4.5 inch filters. Once installed, this filter will help you maintain water of the highest quality, while protecting your fixtures, faucets and appliances from the risk of sediment corrosion. Get the sediment filters you need by adding P5-10BB Tier1 sediment water filters to your cart today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 1
Used In Brands Pentek, Tier1
Manufacturer's Id P5-10BB
UPC 799932624933
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 24.765 x 11.43
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 6 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 10
Flow Rate (lpm) 37.8541
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes One 10 x 4.5 inch Tier1 Spun Wound Polypropylene Filter
Primary Filter Media Polypropylene

The TIER1-P5-10BB is comparable with the following part numbers

5005 355217-43 DGD5005 DGD-5005
P510BB PENTEK-DGD-5005 WDGD 5005 WDGD-5005
155357-43 155357-43 355217-43 DGD-5005
P5-10BB Pentek-DGD-5005 TIER1-P5-10BB WDGD

The TIER1-P5-10BB fits the following model numbers



  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
  4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Insert new filter cartridge
  8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions