While the vast majority of people in the US get their water from a municipal source, over 43 million people (about 15% of households) rely on private wells.
Whether your taps use city water or your home relies on a rural well, you may be partial to one type of water over the other. It’s likely the water in the home you grew up in still influences your opinion of the water you drink today.
A comparison of the actual differences between well water and city water encompasses not just water taste, but also other factors including cost, quality, maintenance, and environmental concerns. Whatever your water type, treating your water to make it the cleanest, healthiest water it can be requires a good understanding of these basics.
If you live in a city, you probably already know your water is piped to your home from a municipal treatment center. Likewise if you make your home in the countryside, it’s pretty clear your water comes from a well.
But if you’re on the outskirts of a suburb or in a new home in a sparsely populated area, you might not know for sure. If this is the case, it should be simple to figure it out:
Depending on where you live, your experience of well water can be very different. Those with the best water supplies may love it, while someone unhappy with well maintenance or treatment issues may long for the relatively responsibility-free experience of city water.
Pros and cons of well water include:
EPA information on private drinking water wells.
When you live in a city, you likely don’t have a choice about getting your water from the municipal water treatment center. Your feelings about your water may depend on a number of factors.
Whether you’re on well water or city water, it’s a good idea to test your water to verify whatever contaminants are in your water. The National Ground Water Association recommends that private well owners have their wells checked and tested every year to ensure water safety.
When you need to treat your water for issues, the choice of treatment solution is based not only on the specific contaminants that need removal, but on the source of your water.
Contaminants in your well water supply may be both natural and manmade, including dissolved minerals, runoff from agriculture or industry, and other pollutants. As surface water seeps underground to the aquifers and groundwater which feed well water, the substances picked up can drastically affect your water quality. The following are the most common well water contaminants and suggested treatment solutions.
If your tap water is cloudy, or has particles that settle on the bottom after you let it sit a while, you have turbidity, or suspended sediment. High sediment can be related to the presence of oxidized metals in the water, microbial life, or pollutants. Treating Turbidity may be as easy as adding a sediment pre-filter to your water filtration system, or may require a UV system if it’s microbial.
Read more about Sediment Filtration
The most common issue associated with well water is hard water. Hard water contains high amounts of dissolved minerals such as calcium and magnesium. Hard water can leave scale on your appliances, build up mineral deposits in plumbing, make laundry feel stiff and rough, and leave your skin and hair dull and lifeless.
A traditional salt-based water softener is recommended for well water. Successful treatment will depend on both the level of hardness, and if there are other contaminants present in the water such as iron.
If the water coming out of your tap is yellowish or red, or you see yellow, red or brown staining on your fixtures or laundry, you may have iron in your water. Iron may give your water a metallic taste, and can turn tea, coffee and potatoes black. Black stains may also be a sign of manganese. Both are often present in well water.
In order to effectively treat the issue, you’ll need to verify both the type and level of the contaminant in your water with a water test.
A whole house Carbon and KDF filtration system reduces heavy metals like lead and mercury, as well as herbicides, pesticides, and Volatile Organic Chemicals (VOCs).
Read more about VOCs, Pesticides and Herbicides
Many contaminants are typically treated at the point of use, such as the faucet used for drinking water. These include nitrates/nitrites, sulfates, arsenic, and lead. The installation of an under sink reverse osmosis (RO) system will filter these contaminants to leave your water clean and healthy.
Nitrate is a compound that occurs naturally, and also has man-made sources. The most common groundwater contamination is from fertilizers and other agricultural runoff.
Read more about Nitrates and Nitrites
The smell of rotten eggs is a telltale sign of the presence of hydrogen sulfide or sulfur bacteria in your water. High sulfate levels can give water a bitter or medicinal taste and can have laxative effects as well as be corrosive to plumbing.
If there is hydrogen sulfide in your water source, you may need to purchase a whole home hydrogen sulfide reduction system.
Read more about Sulfur in Your Water
Arsenic is found in many groundwater sources, including every state in the U.S. While trace amounts are found in many foods naturally, the EPA maximum standard for drinking water is .010 ppm.
There is no safe level of lead in your drinking water, but because it’s tasteless, colorless and odorless, the only way to know for sure if it’s present in your water is to test it.
It’s recommended that you test well water every year for bacteria. For year-round protection, you can install a water filtration system with Ultraviolet (UV) Disinfection to deactivate the bacteria right as it enters your home.
City water has its own set of typical water treatment issues, including the following contaminants.
While chlorine treatment is meant to keep your water disease-free, too much left by the time it reaches your water supply is not only unappealing, but unhealthy at levels above the EPA maximum of 4 ppm.
If you are only concerned about the bleachy taste and odor, you could treat the problem at the tap with a replaceable point of use filter.
If you want to reduce the chlorine in all the water in your home, you can install a filtration system at the point of entry of the water to your home.
When you have chloramine, you should choose a filter specifically designed to treat chloramine.
While a traditional salt-based water softener is recommended to treat hardness in well water, if you’re on municipal water, you can also consider a salt-free water conditioner to remove scale.
Successful treatment of your water issues will depend on both the level of hardness, and if there are other contaminants present in the water such as iron.
As with well water, some typical city water contaminants such as lead and fluoride are treated at the faucet.
Lead in your water is a serious health hazard.
Since the introduction of fluoride toothpaste, mouthwash, and supplements, there is an increased potential for excess fluoride ingestion and resulting health effects.
Ingestion of fluoride toothpaste alone may raise children’s consumption above recommended levels.
You can install a Reverse Osmosis System to treat lead and fluoride in your water.
The US has one of the safest water supplies in the world. While there are significant differences between water treated by a municipality, and the responsibilities of private well water ownership, the right filtration treatment can turn any home’s water into clean and healthy water.