The Rusco 1-100ST-F Sediment Trapper features a 100-mesh polyester screen, which is equivalent to approximately 140 microns. This makes it ideal for capturing larger sediment particles such as sand, rust flakes, silt, and scale before they enter your home's plumbing, appliances, or downstream filtration systems. The reusable screen design eliminates the need for disposable cartridge replacements, making it a cost-effective long-term solution.

Unlike disposable cartridge filters, the Rusco 1-100ST-F Sediment Trapper uses a spin-down design with a reusable polyester screen housed in a clear, see-through polymer body. This allows you to visually monitor sediment buildup and flush the system via the bottom ball valve instead of replacing a cartridge. The 1" FNPT inlet/outlet connections support flow rates up to 50 GPM, and the housing is rated for 150 PSI at 100°F, making it suitable for whole-house and well water applications.

The Rusco 1-100ST-F screen does not have a fixed gallon-based replacement cycle like disposable filters. Instead, flush the unit by opening the bottom valve whenever visible sediment accumulates—typically every 1 to 3 months depending on water quality and usage. The polyester screen itself is reusable and only needs replacement if it becomes torn or permanently clogged, often lasting several years with proper maintenance.

Yes, the Rusco 1-100ST-F is specifically engineered for well water, municipal water, and irrigation pre-filtration. It captures suspended solids including sand, silt, rust particles, scale, and other sediment down to 140 microns. Note that this is a mechanical sediment filter only—it does not remove chlorine, chemicals, bacteria, or dissolved contaminants. For comprehensive treatment, pair it with a downstream carbon or reverse osmosis system.

The Rusco 1-100ST-F should be installed on the main water line after the pressure tank (for wells) or at the point of entry for municipal water, before any downstream filtration or water-using appliances. It requires 1" FNPT threaded connections and should be mounted vertically with the flush valve pointing down. Ensure adequate clearance below the unit for the flush valve operation and drain line. Always install with shutoff valves on both sides to facilitate easy maintenance.