QL-200 Replacement Lamp and Quartz Sleeve for VH200

VIQUA-QL-200

QL-200 Replacement Lamp And Quartz Sleeve For VH200

Name: QL-200 Replacement Lamp And Quartz Sleeve For VH200
Brand: DiscountFilterStore Staging USE THIS
SKU: VIQUA-QL-200
Price: 153.0 USD
Availability: InStock

.price-ui--loading { display: block !important; opacity: 1 !important; }

$153.00

Replacement UV Lamp and Quartz Sleeve for VH200

UV lamp and Quartz sleeve combination is ideal for full system refurbish
Easy do it yourself replacement
Reduces health risks due to contaminants in water
Low maintenance UV system replacements

format_list_bulleted Features & Specs

Package Qty: 1

Manufacturer: Viqua

Manufacturer's Id: QL-200

UPC: 773058111317

Actual Size (in): 14-inches (length) x 2-inches (outside diameter)

Brand: Viqua

Length (in): 14 in

Outside Diameter (in): 2 in

Power Requirements: 35 Watts

Includes: Includes Replacement Lamp, Quartz Sleeve, 2 O-rings, and Spring

description Instructions

Close main water supply to the UV System, and then open a tap downstream of the UV System to release pressure.
Disconnect main power source and allow the unit to cool for 10 minutes. Note: Ensure there is no other power source connected such as, Solenoid Junction Box.
Remove the UV lamp connector and the UV lamp.
(SEE STEP 7-9) Re-insert the new UV lamp inside the quartz sleeve. Attach the connector to the UV lamp and note that the connector will only allow correct installation in one position. Place and tighten the UV lamp connector.
Plug the unit back to the power source. Reset the end of lamp timer alarm back to 365 days.
Close the downstream tap once the UV chamber is filled with water, and inspect for any leakages.
(Quartz Sleeve) Remove the top retaining nut and O-ring. Remove the bottom retaining nut, Spring and loosen the O-ring to drain the water. Remove the quartz sleeve from the UV chamber.
Clean the quartz sleeve with a cloth soaked in CLR, vinegar or some other mild acid and then rinse with water.
Re-insert the quartz sleeve with O-ring(s), Spring, and retaining nut(s). Hand tighten the retaining nut(s), taking care not to over-tighten.

warning_amber Contaminants Reduced

Bacteria

Cryptosporidium

Cysts

Ecoli

Giardia

Microorganisms

Viruses

filter_alt Filter Life

Filter Life (months): 12 months

warning

Prop65 warning applies to products that contain carbon media. Click here for more details

WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

help Product Details

This replacement set includes the replacement UV lamp and quartz sleeve for VH200 as well as necessary replacement o-rings. This pairing of necessary components is ideal for situations when an overhaul of your UV system is necessary. The quartz sleeve is an important part of the UV filter treatment process, it surrounds the UV light preventing it from coming in contact with the water. UV light is transmitted through the quartz sleeve and purifies the water. With time and use the sleeve will accumulate minerals from the water which must be cleaned to prevent the UV treatment from becoming less effective. Once the mineral layer becomes permanent and can not be removed the sleeve needs to be replaced. UV lamps should be replaced every twelve months to ensure the highest quality and purity of water. No need to worry about your VH200 system with the QL-200 Replacement Lamp and Quartz Sleeve, order yours today!

extension Comparable Part Number

QL-200 Replacement Lamp And Quartz Sleeve For VH200

VIQUA-QL-200 is comparable with the following part number(s)

Customer also purchased