RUSCO-1-12-140SS-F

Rusco 1-1/2-140SS-F Screen Stainless Steel Spin-Down Filter System

.price-ui--loading { display: block !important; opacity: 1 !important; }

$116.38 - $614.49

Price Per Item

2 PACK	$112.89
3 PACK	$109.39
4 PACK	$105.90
6 PACK	$102.41

Choose a Pack Size:

Single

2 PACK

3 PACK

4 PACK

6 PACK

format_list_bulleted Features & Specs

Package Qty: 1

Manufacturer: Rusco

Actual Size (in): 15 3/8 inches (length) x 5 1/4 inches (width)

Media: Stainless Steel Screen

Primary Filter Media: Stainless Steel

Brand: Rusco

Fitting Size (in): 112 in

Length (in): 15.38 in

Width (in): 5.25 in

Media Type: Specialty Filter

Flow Rate (gpm): 25.0

description Instructions

Install the filter in a location that protects it from damage such as impact, freeze, excessive heat, chemical contact and water hammer
Install the filter in the preferred vertical position with the purge outlet pointing down and also where it can be easily accessed for cleaning and maintenance
Install the filter on the discharge side of the pump to allow the filter to be cleaned by purging through the flush valve
Refer to arrows on the filter body for correct water flow direction
Adhere to all local and state codes, laws and regulations
Use approved solvent cement for gluing PVC connections. Follow gluing instructions on glue container. REMOVE CLEAR COVER FROM THE PVC BODY PRIOR TO THE GLUING PROCESS. Any excess glue that comes in contact with the clear cover will damage it
The Rusco filter screens should be cleaned every few months. No tools are required for cleaning. The filter screen should be replaced every 6-12 months depending on your water usage and water quality
Clean Rusco filter by purging separated solids through the flush valve while the filter is under system pressure. The purging process can be done manually with the flush valve or automated with our optional Automatic Flush Valve
The filter element may need to be removed and cleaned. To remove the filter element, turn off the water supply, drain water pressure, unscrew the clear cover and remove the filter element. Wash off collected sediment by spraying with water
Remove fine particles wedged in the screen with a soft brush. Apply silicone grease to o-rings if needed and reassemble. HAND TIGHTEN ONLY

warning_amber Contaminants Reduced

Hard Scale

Sand Coarse

Sand Extra Fine

Sand Fine

Sediment

warning

Prop65 warning applies to products that contain carbon media. Click here for more details

WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

help Product Details

The Rusco clear cover is made of high impact polymer resin for maximum strength and durability. The top of the Rusco system is made of PVC. The Rusco sediment filters use centrifugal separation technology to filter sediment from water. The Rusco filtration system has a stainless steel screen filter. The Rusco filter system's filter screen is cleanable and reusable. The Rusco systems have a clear cover that can easily be removed for cleaning. No tools are required to remove the cover. Sediment is visible through the clear cover indicating when the filter needs to be flushed. Rusco Sediment Filters have an open ball valve to easily flush sediment. When the Rusco filter is full of sediment, simply open the ball valve to flush the sediment. Rusco water filtration systems are made from molded non-corrosive materials. If you have a standard Rusco Spin-Down model that is 1-1/2-inch or 2-inch, you can convert it to a Rusco Sediment Trapper model by replacing the filter screen element with a sediment trapper filter.

Rusco 1-1/2-140SS-F Screen Stainless Steel Spin-Down Filter System

Customer also purchased