FQROMF GE Profile SmartWater Ultra Plus Reverse Osmosis Membrane

The GE SmartWater FQROMF is a genuine GE replacement reverse osmosis (RO) membrane designed specifically for GE SmartWater reverse osmosis systems, including the GXRM10G, GXRM10GBL, GXRM10RBL, PNRQ15F, PNRQ15RBL, PNRQ20FBL, and PNRQ21RBL. This TFC (Thin Film Composite) membrane is the heart of your GE RO system and is not interchangeable with other brands' RO membranes due to its unique housing fitment and flow specifications.

The GE FQROMF reverse osmosis membrane filters down to 0.0001 microns, reducing up to 95% of total dissolved solids (TDS) along with a wide range of impurities including lead, arsenic, fluoride, nitrates, sodium, copper, chromium, radium, and cysts. When paired with the pre- and post-carbon filters in your GE SmartWater RO system, it delivers bottle-quality drinking water straight from your tap.

The GE FQROMF RO membrane should be replaced every 2 to 3 years under normal household usage, depending on your incoming water quality and daily consumption. Homes with high TDS levels or hard water may need to replace the membrane sooner. For best results, replace the FQROMF membrane alongside the pre- and post-filters (FQROPF) on their recommended 6–12 month schedule to protect the membrane and maintain peak performance.

Yes. The GE SmartWater FQROMF reverse osmosis membrane is tested and certified by NSF International to NSF/ANSI Standard 58 for reverse osmosis drinking water treatment, verifying its performance in reducing TDS and regulated contaminants. This OEM GE part ensures guaranteed fitment and certified performance in your GE SmartWater RO system.

To install the GE FQROMF, first shut off the water supply to your RO system and drain the storage tank. Unscrew the membrane housing cap, remove the old membrane, and insert the new FQROMF with the double O-ring end going in first. Reattach the housing, turn the water supply back on, and allow the storage tank to fill completely—then drain it fully. Repeat this flushing process 2–3 times (approximately 24–48 hours of cycling) before drinking, to rinse preservatives from the new membrane and deliver clean, great-tasting RO water.