WELL-SAFE-C21000
C21000 Well-Safe Well Sanitizer Pack
High Stock (82)
Translation missing: en.products.product.price.regular_price
$30.81
The Well Safe Well Sanitizer Kit is a convenient do-it-yourself solution for treating your entire well with an easy-to-follow process. Use twice a year to prolong pump life and safely treat unwanted conditions in your well. USDA Food Grade, NSF Listed Standard 60 and EPA Registered.
Note: This product cannot be shipped using any expedited/air methods.
Note: This product cannot be shipped using any expedited/air methods.
| Price Per Item | |
|---|---|
| 2 PACK | $29.88 |
| 3 PACK | $28.96 |
| 4 PACK | $28.03 |
| 6 PACK | $27.11 |
Features & Specs
Features & Specs
Package Qty: 1
Manufacturer: Better Water Industries
Manufacturer's Id: C21000
UPC: 610585815939
Brand: Well-Safe
Includes: Chlorinating pellets Chlorinating granules
Instructions
Instructions- Bypass the water softener, other filters, or purification equipment
- Remove the cap or seal from the casing and, if possible, measure the depth of water in the well to determine how much sanitizer should be used. As a general rule, it is better to use too much sanitizer than too little
- Use a pipe to get by any restriction in the well. A 10-foot length of 3/4-inch PVC is usually ideal (if it is not possible to remove the well cap, remove vent or sanitation plug)
- Drop one tablet into the well and listen to hear if the tablet hits the water. If the tablet hits the water, drop the remaining determined number of sanitizing tablets needed into the well
- Mix the determined amount of granules needed in a clean, plastic five gallon container of water and pour the solution down the well to sanitize the upper portion of the well. Do not add water to product
- It is necessary to circulate the water in the well to mix the sanitizer thoroughly throughout the entire water system. Connect a hose to an outside silcock that is located after the pressure tank and run water back down the well
- After approximately 15 minutes of circulating the water, a strong chlorine odor should be present; if not, repeat steps 4 and 5. Run water until you detect chlorine odor at all taps. Allow the sanitized water to stand in the system for at least six hours
- Iron, slime, and organic material may come loose and plug pump screens. DO NOT RUN PUMP IF WATER DOES NOT FLOW. The high level of chlorine required to sanitize system is corrosive to most metals. Solution must not remain in the system more than 36 hours
- Chlorine may cause water to color. Open an outside faucet and flush system until no chlorine smell is detected. Flush each faucet in the system. Do not run high levels of chlorine into septic system
- Return all equipment to service position. The water should be tested 2 to 3 weeks after sanitizing. If bacteria, iron bacteria, sulfur, or other problems recur, contact your water professional for further treatment
Filter Life
Filter Life
Filter Life (gallons): 100
Filter Life (months): 4 months
The Well Safe Well Sanitizer Kit is an effective and convenient do-it-yourself solution for treating your entire well. It offers an easy-to-follow process and is designed to be used twice a year to prolong pump life and safely treat unwanted conditions in your well. The product is USDA Food Grade, NSF Listed Standard 60, and EPA Registered, making it a reliable and safe option for well sanitation.
One of the most significant advantages of the Well Safe Well Sanitizer Kit is that it is user-friendly and safe to use in your well or storage tank. Unlike laundry bleach, which may contain benzene, metals, and other contaminants, this kit uses calcium hypochlorite pellets and granules that are approved by the USDA. This means that you can trust the product to eliminate harmful bacteria and other contaminants from your well, without the risk of introducing new pollutants.
Using the kit is a straightforward process (see Instructions tab, or information included with your product for a full list of instructions). The 8 oz. container of chlorine pellets is poured into the well casing, where they dissolve after dropping to the bottom. The 8 oz. container of chlorine granules is mixed with 5 gallons of water and poured into the well casing, making it the best method of sanitizing your well. With this easy-to-use solution, you can ensure that your well is free from foul odors and harmful contaminants and remains in excellent condition for years to come.
One of the most significant advantages of the Well Safe Well Sanitizer Kit is that it is user-friendly and safe to use in your well or storage tank. Unlike laundry bleach, which may contain benzene, metals, and other contaminants, this kit uses calcium hypochlorite pellets and granules that are approved by the USDA. This means that you can trust the product to eliminate harmful bacteria and other contaminants from your well, without the risk of introducing new pollutants.
Using the kit is a straightforward process (see Instructions tab, or information included with your product for a full list of instructions). The 8 oz. container of chlorine pellets is poured into the well casing, where they dissolve after dropping to the bottom. The 8 oz. container of chlorine granules is mixed with 5 gallons of water and poured into the well casing, making it the best method of sanitizing your well. With this easy-to-use solution, you can ensure that your well is free from foul odors and harmful contaminants and remains in excellent condition for years to come.