R30-20BB 155430-43 Pentek Pleated Polyester Filter Cartridge Comparable Replacement Kit with O-ring and Lubricant by Tier1 (20 inches x 4-1/2 inches, 30 Micron)

SKU
TIER1_FHR_20_45_PLEATED_KIT
Price $24.99

Availability: In stock

Price as configured $24.99

  • Ships fast!
  • Includes filter, o-ring and lubricant packet
  • Manufactured for performance, priced for value
  • Pleated design ensures greater dirt holding capacity
See more product details
The 20 x 4.5 inch pleated polyester filter replacment kit by Tier1 includes everything you need for filter change maintenance. The exclusive kit includes a 30 micron pleated polyester R30-20BB Pentek comparable filter, replacement O-ring, and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and component you need to finish the job. The R30-20BB Pentek comparable filter by Tier1 captures dirt, sand and sediment down to 30 microns. The system installs quickly and easily, order today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-20-45-PLEATED
UPC 641945752342
Advertised Size (in) 20 x 4-1/2
Actual Size (in) 20 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 24.765 x 11.43
Primary Filter Media Pleated Polyester
Filter Life (gallons) 24000
Filter Life (liters) 90849.84
Filter Life (months) 6 months
Micron Rating (Nominal) 30
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 10
Flow Rate (lpm) 37.854
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes R30-20BB Pentek Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter Media Pleated Polyester

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions