R30-BB 155101-43 Pentek Pleated Polyester Filter Cartridge Comparable Replacement Kit with O-ring and Lubricant by Tier1 (4.5 inches x 9-3/4 inches, 30 Micron)

SKU
TIER1_FHR_10_45_PLEATED_KIT
Price $20.99

Availability: In stock

Price as configured $20.99

  • Ships fast!
  • Includes filter, o-ring and lubricant packet
  • Manufactured for performance, priced for value
  • Pleated design ensures greater dirt holding capacity
See more product details
The 10 x 4.5 inch pleated polyester filter replacement kit by Tier1 includes everything you for filter change maintenance. The exclusive kit includes a 30 micron pleated polyester R30BB Pentek comparable filter, replacement O-ring, and lubricant packet to make your next filter change a breeze. The experts at Tier1 have worked hard to ensure this kit contains the filter and component you need to finish the job. Water taste and quality is critical business, the R30BB Pentek comparable filter by Tier1 captures dirt, sand and sediment down to 30 microns. The system installs quickly and easily, order today!

Experience the Tier1 Difference

Tier1 manufactures high-quality filtration and household products. We take creating and maintaining a healthy home seriously. Products must undergo rigorous testing and meet demanding quality expectations in order to earn the Tier1 badge. Every purchase is backed by the Tier1® Guarantee:

  • Guaranteed Fit
  • Guaranteed Quality
  • Guaranteed Price
Package Qty 3
Used In Brands Tier1
Manufacturer's Id FHR-10-45-PLEATED
UPC 641945752281
Advertised Size (in) 10 x 4-1/2
Actual Size (in) 9 3/4 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 24.765 x 11.43
Primary Filter Media Pleated Polyester
Filter Life (months) 6 months
Micron Rating (Nominal) 30
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 10
Flow Rate (lpm) 37.854
Color White
Warranty Guarantee Unconditional Product Guarantee for Life of the Product
Includes R30BB Pentek Comparable Replacement Filter, O-ring, and Lubricant
Primary Filter Media Pleated Polyester

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present)
  2. Discard used filter cartridge
  3. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
  4. Insert new filter cartridge
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Reset Instructions