X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Replacement Quartz Sleeve for Viqua VH200

SKU
VIQUA-QS-001
Price $36.00 List Price Price $41.00 Save 12%
Availability: BackOrder
  • Decrease health risk from water contaminants
  • Long life quartz sleeve
  • Replacement sleeve compatible with Viqua VH200
  • Low maintenance component for UV system
See more product details
The VIQUA-QS-001 quartz sleeve is an important part of the UV filter treatment process, it surrounds the UV light preventing it from coming in contact with the water. UV light is transmitted through the quartz sleeve and purifies the water. With use the sleeve will accumulate minerals from the water which must be cleaned about every 3 months to prevent the UV treatment from becoming less effective. Once the mineral layer becomes permanent and can not be removed the sleeve needs to be replaced. Protect your UV lamp and keep your system running properly with the Replacement Quartz Sleeve for Viqua VH200. Order yours today!
Package Qty1
Manufacturer's IdQS-001
UPC773058030861
Actual Size (in)14-inches (length) x 2-inches (outside diameter)

Reduced Contaminants

The VIQUA-QS-001 is comparable with the following part numbers

VH200, S1Q-PA, SSM-14 UV systems

Instructions

  1. NOTE: Water must be turned off with chamber drained and UV Lamp removed before quartz sleeve can be cleaned and or replaced.
  2. Remove the top retaining nut and O-ring.
  3. Remove the bottom retaining nut, Spring and loosen the O-ring to drain the water. Note: Ensure that the quartz sleeve does not slide through.
  4. Remove the quartz sleeve from the UV chamber.
  5. Clean the quartz sleeve with a cloth soaked in CLR, vinegar or some other mild acid and then rinse with water.
  6. Re-insert the quartz sleeve with O-ring(s), Spring, and retaining nut(s).
  7. Hand tighten the retaining nut(s), taking care not to over-tighten.
  8. When completed, replace the UV lamp and turn water back on.

Reset Instructions