W9123053 Doulton UltraCarb Undersink Ceramic Candle Replacement Filter Cartridge

SKU
DOULTON-W9123053
Price $35.00
Availability: In stock
Fits Doulton HIP, HIS and HCPS housings (NOT gravity-fed)
  • Sterasyl ceramic outer shell and carbon block core and heavy metal reduction media
  • Self-sterilizing silver locked within the ceramic structure inhibits bacteria growth
  • Will not remove beneficial and pleasant-tasting minerals from your drinking water
  • Effectively reduces lead and pathogenic bacteria, including cholera, salmonella and typhoid
See more product details
The Doulton W9123053 UltraCarb 10-inch Filter Candle features four stages of filtration in a single cleanable cartridge. It reduces suspended solids, chlorine, lead and other trace contaminants, as well as improving taste. Also known as Mountain Pure Water #MT661-RFC, the carbon core improves taste, while also reducing particulates and other chemical contaminants overall. In addition to being NSF certified, the W9123053 water filter has been tested and approved by the World Health Organization--for excellence you can depend on.
Package Qty 1
Used In Brands Doulton
Manufacturer's Id W9123053
UPC 799705702004
Media Ultracarb ceramic media with Activated Carbon Block core and Lead Removal media
Primary Filter Media Ceramic with Carbon
Filter Life (gallons) 600
Filter Life (liters) 2,300
Micron Rating (Nominal) 0.5
Operating Pressure (psi) 10 - 125
Maximum Operating Pressure (psi) 125
Operating Temperature (°F) 41 - 86
Operating Temperature (°C) 5 - 30
Flow Rate (gpm) 0.9
Flow Rate (lpm) 3.3
Certifications NSF/ANSI Standard 42, NSF/ANSI Standard 53

Contaminants

Reduces the following contaminants:

  • Insecticide
  • Particulates
  • Salmonella
  • Sediment
  • Total Trihalomethanes (TTHM)

The DOULTON-W9123053 is comparable with the following part numbers

DOULTON-W9123053
W9123053

User Guide

Instructions

  1. The ceramic shell of the water filter is designed to filter fine particles, bacteria and other contaminants from your water. The ceramic shell can eventually need cleaning. When this occurs, simply remove, clean and replace the cartridge
  2. Wash your hands with filtered water
  3. Remove the ceramic cartridge according to the instructions of your particular filter housing (handle with care, wet cartridges are fragile!)
  4. Take a clean scouring pad, or slightly abrasive cloth, and give the ceramic a light scrub under running water
  5. Apply gentle pressure uniformly. This will remove surface particles from the water filter as well as an outer layer of ceramic, restoring and refreshing the water filter to its original water flow
  6. Replace cartridge in filter housing. Wash hands thoroughly after handling the ceramic cartridge
  7. Important: Care must be taken at all times to prevent contamination of the end of the cartridge mount from unfiltered water and/or dirty hands from cleaning the cartridge surface
  8. Do not use soap or detergents. Cleaning can be done over 50 times before replacement of the water filter cartridge will be necessary
  9. The carbon core, more than likely, will become exhausted before the outer ceramic layer begins to thin, unless you are filtering sediment heavy water, and cleaning is done often

Reset Instructions