3M Aqua-Pure AP217 Undersink Filter Replacement Cartridge

SKU
AQUAPURE-AP217
Price $37.49
Availability: Out of stock
Fits 3M Aqua-Pure undersink water filter systems
The 3M Aqua-Pure AP217 water filter is a dual action filter for use with 3M Aqua-Pure's compact undersink water filtration systems. The AP217 is a short, round cartridge with a grooved resin-bonded pre-filter on one end, and an encased granular carbon post-filter with connector on the other end.
Package Qty 1
Used In Brands Aqua-Pure
Manufacturer's Id AP217
UPC 051128888949
Actual Size (in) 8.8125 inches (length) x 4 7/8 inches (outside diameter)
Actual Size (cm) 22.38 x 12.3825
Media Carbon Block with Sediment Filter
Primary Filter Media Carbon Block
Pre Filter Media Graded Density Resin
Filter Life (months) 4 months
Micron Rating (Nominal) 5
Operating Pressure (psi) 0 - 125
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Flow Rate (gpm) 1.75
Flow Rate (lpm) 6.6
Fitting Type NPT
Fitting Size (inches) 3/8 inch
Certifications NSF/ANSI Standard 42

The AQUAPURE-AP217 is comparable with the following part numbers

4629002 4629005 46290-02 46290-05
AP200 AP210 AP217 AP-217
DW200 DW200R DW200-R DW-200R
PW200 SSTSD 2P076 4330-00-256-3681
40161502

The AQUAPURE-AP217 fits the following model numbers

AP200

Installation Guide

User Guide

Instructions

  1. The 3M Aqua-Pure AP217 water filter cartridge needs to be replaced every 3-4 months, or sooner depending on your water quality and usage
  2. Turn off water to filter
  3. Open faucet to relieve pressure
  4. Unscrew housing
  5. Unscrew cartridge
  6. Wipe housing clean and lubricate o-ring with food-grade silicone lubricant
  7. Screw in new cartridge
  8. Turn water back on

Reset Instructions