AP817-2 3M Aqua-Pure Whole House Filter Replacement Cartridge

SKU
AQUAPURE-AP817-2
Price $111.99
Availability: In stock
Fits 3M Aqua-Pure whole house water filter systems
The 3M Aqua-Pure AP817-2 water filter is for use with many 3M Aqua-Pure whole house filters that use 20 inch x 4 1/2 inch water filters.
Package Qty 1
Used In Brands Aqua-Pure
Manufacturer's Id AP817-2
UPC 54007979722 
Advertised Size (in) 20 x 4-1/2
Actual Size (in) 20 inches (length) x 4 1/2 inches (outside diameter)
Actual Size (cm) 50.8 x 11.43
Media Granular Activated Carbon
Primary Filter Media Granular Activated Carbon
Filter Life (months) 6 months
Micron Rating (Nominal) 25
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Flow Rate (gpm) 20
Flow Rate (lpm) 75.708

The AQUAPURE-AP817-2 is comparable with the following part numbers

5589803 55898-03
56027-07 Ametek/Pentek GAC20-BB GAC Filter 155249-43
AP802 AP802-1.5
AP802-1.5C AP-815-2
AP817-2 5602707

The AQUAPURE-AP817-2 fits the following model numbers

AP802
AP802-1.5-C

Installation Guide

User Guide

Instructions

  1. The 3M Aqua-Pure AP817-2 water filter needs to be replaced every 6 months. The filter may need to be replaced sooner depending on your water quality and your water usage
  2. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system
  3. Turn off incoming water
  4. Bleed pressure from the unit by depressing the red button on top of unit
  5. Remove housing by sliding wrench up toward head then turn left to unscrew
  6. Wipe housing clean and insert new cartridge
  7. Lubricate o-ring and screw housing into head
  8. Turn water back on

Reset Instructions