Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

HF-360B Culligan Valve-In-Head Whole House Filter System

Price $62.99 List Price Price $89.99 Save 30%
Availability: In Stock - Free Shipping
Available Add-Ons

Fits Culligan HF-150, HF-160, HF-360 filter housings

SKU: CULLIGAN-UB-1 › See more product details

UB-1 Culligan Whole House Filter Mounting Bracket

Fits Culligan HF-150, HF-160, HF-360 filter housings
Add: $19.99 $13.99
  • Clear filter housing
  • Easily installs on 3/4 inch main water line
  • Built-in shut off valve
  • Clear housing so you can see when the filter needs to be changed
› See more product details
  • Clear filter housing
  • Easily installs on 3/4 inch main water line
  • Built-in shut off valve
  • Clear housing so you can see when the filter needs to be changed
CULLIGAN HF-360B (previously HF-360 or CULLIGAN-HF-360A) is a whole-house water filtration system with a built-in shut-off valve. The HF-360B has a newer design that has an added o-ring to the head and the head has an added piece where both o-rings are on the head. Uses most 2 1/2 inch x 10 inch replacement filter cartridges.
More Information
Package Qty 1
Used In Brands Culligan
Manufacturer's Id HF-360
UPC 033663005310
Actual Size (in) 13 1/2 inches (length) x 5 1/2 inches (outside diameter)
Actual Size (cm) 34.29 x 13.97
Outside Diameter (inches) 5.5
Operating Pressure (psi) 30 - 125
Operating Temperature (°F) 40 - 100
Operating Temperature (°C) 4.4 - 37.8
Fitting Size (inches) 3/4 inch
Country of Manufacture Mexico
Warranty Guarantee 5 year limited warranty
Includes Housing, Culligan SW-2 housing wrench, Installation and operating instructions

The CULLIGAN-HF-360 is comparable with the following part numbers

49560 150443 American Plumber WVC-34 Ametek Kleen Plus PSCL-S1
Ametek Kleen Plus PSCL-SI Ametek Kleen Plus PVHCL-S1 Ametek Kleen Plus PVHCL-SI Culligan/Pentek/American Plumber OR-34 O-Ring
CW-F HF-160 HF-360 HF-360A
HF-360B HF-365 P1 P5
Pentek 150437 S1A SW-2 Housing Wrench UB-1 Mounting Bracket

Installation Guide

User Guide


  1. The housing should not be installed near a well pump
  2. The whole house system has 3/4-inch inlet/outlets for easy installation on the 3/4-inch main cold water line (if you have a 1/2-inch water line, you can use a reducer nipple to reduce the inlet/outlet down to the 1/2-inch size)
  3. If water is leaking around the red pressure relief valve, it means that the o-ring in the cap assembly needs lubrication
  4. Lubricating O-Ring with silicone grease will keep it from kinking when the lever is operated, and it will also swell to keep the seal tight
  5. To lubricate O-Ring, remove the screw from the on/off lever and remove the lever
  6. Under the lever is a metal plate with four screws, remove screws and then plate
  7. Remove the white plastic valve stem (it comes straight up and out)
  8. Under the stem is a 3/4-inch diameter black O-Ring, lubricate thoroughly with some silicone grease
  9. There is a 2nd o-ring on the underside of the HF-360 cap that would also be beneficial to lubricate at the same time
  10. The on/off valve operates a white plastic plunger, and at the end of that plunger is a 1/4-inch black o-ring that may need some lubrication also (this o-ring cannot be removed)