We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
GAC20-BB Pentek Whole House Filter Replacement Cartridge
SKU
PENTEK-GAC20-BB
Price $76.14 List Price Price $108.99 Save 30%
Availability: In Stock - Free Shipping
Fits any heavy duty housing that uses 20-inch x 4 1/2-inch replacement filter cartridges
- Drop-in cartridge design allows for quick filter change on most heavy duty 20 inch housings
- Designed for maximum adsorption with post-filter to reduce carbon fines
› See more product details
- Drop-in cartridge design allows for quick filter change on most heavy duty 20 inch housings
- Designed for maximum adsorption with post-filter to reduce carbon fines
The PENTEK-GAC-20BB cartridge provides effective reduction of chlorine and bad taste & odor from your drinking water. The filter cartridge is manufactured to prevent channeling or bypass and maximize contact with the filter media. The innovative post-filter reduces carbon fines before the water leaves the cartridge for cleaner, better tasting drinking water. Ideal for general-purpose water filtration with a high flow rate.
Reduced Contaminants
The PENTEK-GAC20-BB reduces the following contaminants:
- Bad Taste and Odor
- Chlorine Taste & Odor
- Sediment
The PENTEK-GAC20-BB is comparable with the following part numbers
155249-43 |
GAC20-BB |
GAC-20BB |
User Guide
Instructions
- Turn off water supply. Press red pressure-relief button (if present).
- Unscrew housing. Remove large o-ring, wipe clean and set aside.
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
- Insert new filter cartridge.
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.