VIN-34-PR10 Pentek Whole House Valve-in-Head 10 inch Filter Housing

Price $43.99
Availability: In stock
  • 3/4 inch NPT inlet and outlet ports
  • Housing accommodates any standard 10 inch filter cartridges with a 2 3/8 - 2 7/8 inch diameter
  • Built in pressure-relief button
  • Leak proof sealing with top seated Buna-N O-ring
See more product details
The Pentek valve-in-head filter housing allows both inlet and outlet ports to be simultaneously shut-off with a half turn of the handle. The PENTEK-VIN-34-PR10 is made from a durable polypropylene and accommodates a wide variety of replacement filter cartridges. The VIN-34-PR10 offers outstanding chemical compatibility and is ideal for use in a variety of low-flow applications.
Package Qty 1
Used In Brands Pentek
Manufacturer's Id VIH-34-PR10
UPC 799932596308
Actual Size (in) 12 1/4 inches (length) x 5 1/8 inches (outside diameter)
Actual Size (cm) 31.12 x 13.0175
Materials of Construction Cap: Reinforced Polypropylene, Button Assembly: 300-series Stainless Steel, EPDM, and Polypropylene, Valve Parts: Delrin
Operating Pressure (psi) 30 - 125
Operating Temperature (°F) 40 - 125
Operating Temperature (°C) 4.4 - 51.7
Flow Rate (gpm) 8.00
Flow Rate (lpm) 30.28
Fitting Type NPT
Fitting Size (inches) 3/4 inch

The PENTEK-VIN-34-PR10 is comparable with the following part numbers


User Guide


  1. Easy to install number 10 Standard VIH Whole House Water Filter System. The housing is 12-1/2-inches x 5-1/8-inches(318 mm x 130 mm). You will need to allow slightly more room in addition to the housing dimensions for installation
  2. 3/4-inch inlet/outlet for easy installation on a cold water line
  3. A UB-1 mounting bracket is recommended for installation of the whole house housing
  4. NOTE: When installed, protect housing against freezing to prevent cracking of the filter and water leakage

Reset Instructions