SDC-25-1005 Hydronix Whole House Replacement Sediment Filter Cartridge

SKU
HYDRONIX-SDC-25-1005
Price $5.99
Availability: In stock
Fits most housings that accept 10-inch x 2.5-inch water filter cartridges
Choose a quantity
  • 1 Filter $5.99  
  • 6 Filters Price $5.39 each
  • 5 micron fine sediment filter for cleaner water
  • Graded density for higher dirt holding capacity
  • For optimum dirt-holding, replace about every 2-3 months
  • Materials ANSI/NSF Standard 42 tested and certified
See more product details
The Hydronix SDC-25-1005 sediment water filter is a 100% pure polypropylene cartridge. It is a perfect pre-filter for reducing sand, silt, rust and scale, and is a compatible replacement cartridge for many brands of 10-inch standard sediment filters.
Package Qty 1
Used In Brands American Plumber, Culligan, Hydronix, Liquatec, Pentek, Watts
Manufacturer's Id SDC-25-1005
UPC 799705708006
Advertised Size (in) 10 x 2-1/2
Actual Size (in) 9 7/8 inches (length) x 2 1/2 inches (outside diameter)
Actual Size (cm) 25.0825 x 6.35
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 2 months
Micron Rating (Nominal) 5
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) 5.00
Flow Rate (lpm) 18.93

The HYDRONIX-SDC-25-1005 is comparable with the following part numbers

15-052-00 4712-87 9320-1135 COR105
COR120 DEV910908 ED-S-1 K-00069
K-00173 PFS105 S5-10 SF31-SEDS
VX05-978 SDC-25-1005

Instructions

  1. Each time you replace your filter, clean and inspect the o-ring in between the housing cap and sump
  2. If there is any damage to the o-ring replace it
  3. After cleaning the o-ring, apply a silicone lubricant like OR-LUBRICANT-SM (purchasable separately)
  4. You must use a silicone food grade lubricant, all other types of lubricant could damage the o-ring
  5. Silicone lubricant prevents leaking and extends the life of the o-ring

Reset Instructions