X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

SDC-25-2020 Hydronix Whole House Replacement Sediment Filter Cartridge

SKU
HYDRONIX-SDC-25-2020
Price $15.99 List Price Price $22.99 Save 30%
Availability: In Stock
Fits most housings that accept 20-inch x 2.5-inch water filter cartridges
  • 20 micron sediment filter for cleaner water
  • Graded density for higher dirt holding capacity
  • For optimum dirt-holding, replace about every 2-3 months
  • Materials ANSI/NSF Standard 42 tested and certified
› See more product details
  • 20 micron sediment filter for cleaner water
  • Graded density for higher dirt holding capacity
  • For optimum dirt-holding, replace about every 2-3 months
  • Materials ANSI/NSF Standard 42 tested and certified
The Hydronix SDC-25-2020 sediment water filter is a 100% pure polypropylene cartridge. It is a perfect pre-filter for reducing sand, silt, rust and scale, and is a compatible replacement cartridge for many brands of 20-inch standard sediment filters.
More Information
Package Qty 1
Used In Brands Hydronix, Liquatec, Pentek, Watts
Manufacturer's Id SDC-25-2020
UPC 799705708075
Advertised Size (in) 20 x 2-1/2
Actual Size (in) 20 inches (length) x 2-1/2 inches (diameter)
Actual Size (cm) 50.8 x 6.35
Outside Diameter (inches) 2.5
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (months) 3 months
Micron Rating (Nominal) 20
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) The flow rate is a measure of many gallons per minute can flow through the unit. This value is the maximum recommended gpm for the unit.x The flow rate is a measure of many gallons per minute can flow through the unit. This value is the maximum recommended gpm for the unit.x 10.00
Flow Rate (lpm) 38.00
Certifications NSF/ANSI Standard 42
Warranty Guarantee Manufacturer 1 Year Limited Warranty
Additional Information Recommended Replaceable Pressure Drop: 21.75 PSI (1.5 kg/cm2), Maximum Pressure Drop: 69 F (20 C) 46.4 psi (3.2 kg/cm2), Initial Pressure Change @ Flow: 0.3 psi at 10 gpm

Instructions

  1. Each time you replace your filter, clean and inspect the o-ring in between the housing cap and sump
  2. If there is any damage to the o-ring replace it
  3. After cleaning the o-ring apply a silicone lubricant, like OR-LUBRICANT-SM (purchasable separately)
  4. You must use a silicone food grade lubricant--all other types of lubricant could damage the o-ring
  5. Silicone lubricant prevents leaking and extends the life of the o-ring