Refrigerator Filters
  • Whole House Filtration
  • Air Filters
  • Water Filters
  • Is Reverse Osmosis Water the Same as Distilled Water? RO vs Distillation

    November 02, 2026 9 min read

    riNo: reverse osmosis water is not the same as distilled water, because reverse osmosis forces water through a semipermeable membrane under pressure, while distillation boils water and condenses the steam. Both make low-mineral, high-purity water, and the FDA says Water for Injection (WFI) may be made only by distillation or reverse osmosis. Each method can still miss different things: distillers can carry VOCs over with the vapor, and RO needs a certified claim for any specific contaminant.

    For a CPAP humidifier or a room humidifier, follow your device maker, because ResMed and Philips name distilled water.

    Explore

    Shop Under-Sink RO Systems

    Want low-mineral water on tap instead of waiting on a distiller batch? Compare under-sink reverse osmosis systems and the replacement filters that keep them running.

    How Reverse Osmosis and Distillation Make Water

    Reverse osmosis and distillation make water by different methods: reverse osmosis uses pressure to push water through a semipermeable membrane, and distillation boils water, condenses the steam and collects it. Table 1 sets the two processes side by side. The takeaway is that RO filters water, while a distiller turns it to steam and back.

    Reverse osmosis pushes water through a membrane under pressure, while distillation boils water and condenses the steam.

    Table 1. RO vs Distillation: How Each Works

    Attribute Reverse osmosis Distillation Source
    Mechanism Pressure forces water molecules through a semipermeable membrane Water is boiled; the steam is condensed and collected EPA WaterSense; NSF
    What is left behind Rejected solids go to the drain Boiler keeps dissolved solids, salts and heavy metals EPA WaterSense; Waterwise 4000 guide
    Energy Water pressure; no heating mentioned Heats water to boiling; Waterwise 4000 is air-cooled by a fan EPA WaterSense; Waterwise 4000 guide
    Extra stages Carbon pre-filters and post-filters Carbon filter for VOCs NSF; Waterwise 4000 guide

    Reverse osmosis: pressure and a semipermeable membrane

    Reverse osmosis makes water by using pressure to force water molecules through a semipermeable membrane, according to EPA WaterSense. NSF notes that RO systems often add extra filters on either side of the membrane.

    The prefilter and post-filter stages wear out on their own schedule. Replacement stages for these systems are in our reverse osmosis filters collection.

    Distillation: boil, condense, collect

    Distillation makes water by boiling it, turning it into steam, then condensing that steam back into liquid and collecting it. In the Waterwise 4000 Use & Care Guide, water begins collecting about 30 minutes after startup. Light gases are vented, and the unit is air-cooled by a fan.

    A full one-gallon batch in the Waterwise 4000 takes approximately four hours.

    What each process leaves behind

    Reverse osmosis sends what the membrane rejects to the drain, while distillation leaves dissolved solids, salts and heavy metals behind in the boiler. The Waterwise 4000 guide also lists dead microbes among what stays in the boiler. NSF notes the weak spot of distillation: gas-forming contaminants such as VOCs can travel over with the vapor.

    RO Water vs Distilled Water: Purity, VOCs and Taste

    RO water and distilled water are both high-purity, low-mineral water, but they differ in how dissolved solids and VOCs are handled and in the NSF standard each one is certified to. Table 2 compares them on the questions buyers ask most. It uses only what EPA, NSF and the distiller maker state, with no ppm figures.

    Table 2. Purity and Certification Compared

    Question Reverse osmosis Distillation Source
    Dissolved solids WaterSense-labelled RO must reduce TDS by at least 75%; NSF/ANSI 58 requires a TDS claim Boiler keeps dissolved solids, salts and heavy metals EPA WaterSense; NSF; Waterwise 4000 guide
    VOCs and gases Carbon stages; a VOC claim is optional under NSF/ANSI 58 VOCs can travel over with the vapor, so distillers add a carbon filter NSF; Waterwise 4000 guide
    Standard that applies NSF/ANSI 58 NSF/ANSI 62 NSF
    A specific contaminant Confirm it is on the certification Confirm it is on the certification NSF

    Dissolved solids: certified RO floor and distillation

    Certified reverse osmosis must reduce TDS by at least 75% in the EPA WaterSense test, while a distiller leaves dissolved solids behind in the boiler. The EPA WaterSense RO specification sets that 75% floor and requires the label to report TDS and the listed contaminants. Neither source gives a ppm figure for the finished water.

    To know where your own water stands, measure it with a TDS meter before and after treatment.

    Gases and VOCs: where distillers need a carbon filter

    Distillers need a carbon filter because gas-forming contaminants such as VOCs can travel over with the steam, according to NSF. The Waterwise 4000 uses a coconut-shell carbon filter that polishes the water by adsorbing VOCs. That filter is replaced every 2 months or after 60–80 gallons.

    RO systems often carry carbon stages too. Under NSF/ANSI 58, though, a VOC reduction claim is optional, so check the certification listing for the claim you need.

    Certification: NSF/ANSI 58 vs NSF/ANSI 62

    Reverse osmosis systems are certified under NSF/ANSI 58, and distillers are certified under NSF/ANSI 62. NSF's page on NSF/ANSI 58 places reverse osmosis systems within that standard's scope. NSF also says certification to a standard does not guarantee reduction of every contaminant.

    So confirm the specific contaminant you care about is on the product's certified claim. The Waterwise 4000 guide, for example, states the unit is not tested or certified by the California Department of Public Health.

    Taste and minerals

    RO water and distilled water are both low-mineral water, and this guide makes no health claim about either one. The question of whether low-mineral water is good or bad for you has its own guide on what removing minerals from RO water means. Here, the point is simply that neither process is the "mineral-rich" option.

    Can RO Water Replace Distilled Water?

    RO water can replace distilled water only where the device maker allows it, and for CPAP machines ResMed and Philips name distilled water, not RO water. Table 3 lists what each maker says. Where a maker names distilled water, use distilled water.

    Which water to use: CPAP machines need distilled water per ResMed and Philips; Honeywell humidifiers accept maintained RO water.

    Table 3. What Device Makers Say About Water Type

    Use Maker guidance What to do Source
    CPAP humidifier Philips DreamStation 2: "use only room temperature distilled water"; ResMed recommends distilled water Use distilled water Philips; ResMed
    Humidifier Distilled or another verified low-mineral water; properly maintained RO water accepted Check your manual; keep the RO system maintained Honeywell
    Lab or pharmaceutical WFI may be made only by distillation or RO Follow the standard; not a home-use claim FDA
    Coffee, aquarium, batteries, irons No maker guidance reviewed Check the equipment maker None

    CPAP machines: ResMed and Philips name distilled water

    CPAP humidifiers should be filled with distilled water, because Philips and ResMed both name distilled water in their instructions. The Philips DreamStation 2 instructions say: "Use only room temperature distilled water in the humidifier water tank." Philips also says to add no chemicals or additives, and to use potable water only for washing and rinsing the tank.

    ResMed says: "We recommend the water tub be filled using distilled water." ResMed adds that tap water contaminants can build up and reduce performance, and that distilled water prevents mineral buildup and extends tub life.

    Neither maker mentions RO water. Use what your device maker names, and check your own CPAP manual if it's a different model.

    Humidifiers: distilled first, maintained RO accepted by Honeywell

    Honeywell recommends distilled water for its humidifiers but accepts properly maintained reverse osmosis water. Honeywell advises "distilled or another verified low-mineral water" for every refill, and says hard tap water is the usual source of white dust. For some ultrasonic models, it also accepts a compatible demineralization cartridge.

    Honeywell warns that bottled water labeled "purified" is not necessarily distilled. Our separate guide answers can you use filtered water in a humidifier for other filter types.

    Honeywell's guidance covers its own humidifiers, not every brand. Check your own humidifier manual before switching water types, and use it to match humidifier filters when one is due.

    Lab, pharmaceutical and other uses: check the maker

    For lab, pharmaceutical and other uses, the equipment maker or the governing standard decides whether RO water can replace distilled water. The FDA's guide to water for pharmaceutical use says "USP WFI may be made only by distillation or reverse osmosis." That is a pharmaceutical standard, not a claim about home drinking water.

    For coffee makers, aquariums, car batteries, plants and steam irons, check the equipment or livestock maker. This guide doesn't cover those uses.

    Speed, Water Use and Upkeep Compared

    Reverse osmosis and distillation differ most in speed, water use and upkeep: a home distiller takes about four hours per gallon, while an RO system sends drain water away and needs filter changes. Table 4 uses maker and EPA numbers only. Prices are left out on purpose.

    Table 4. Speed, Water Use and Upkeep

    Factor Reverse osmosis Distiller Source
    Output USWF RO-2F-600: rated 600 gallons per day, tankless Waterwise 4000: about 4 hours per gallon DFS product page; Waterwise 4000 guide
    Water use WaterSense: at least 30% efficiency, up to about 2.3 gallons of drain water per gallon Air-cooled by a fan, so no drain water EPA WaterSense; Waterwise 4000 guide
    Upkeep Prefilter 1,000 gallons or 12 months; membrane 2,000 gallons or 24 months Carbon filter every 2 months or 60–80 gallons; descale boiler; clean condenser fins DFS product page; Waterwise 4000 guide

    Distiller: about 4 hours per gallon

    A home distiller like the Waterwise 4000 takes approximately four hours to make one gallon, according to its Use & Care Guide. Water starts collecting about 30 minutes after startup. Upkeep is regular rather than occasional.

    1. Rinse the boiler before each cycle.
    2. Descale the boiler as deposits build, with a vinegar solution or an approved cleaner.
    3. Replace the carbon filter every 2 months or after 60–80 gallons.
    4. Clean the condenser fins when output drops.

    RO: drain water and filter changes

    A WaterSense-labelled RO system must reach at least 30% efficiency, which works out to about 2.3 gallons of drain water per gallon of treated water at the minimum. The USWF RO-2F-600 is rated at 600 gallons per day without a tank. Its composite prefilter lasts 1,000 gallons or 12 months, and its RO membrane cartridge lasts 2,000 gallons or 24 months, whichever comes first.

    When the membrane stage is due, our collection of membranes for home water filters holds replacements. Match the part to your system's manual before ordering.

    Which one fits a household

    The right choice between RO and a distiller depends on what the water is for, how fast you need it and whether drain water matters. Use these checks:

    • A device maker names distilled water (ResMed and Philips CPAP): use distilled water.
    • You want water on demand: compare RO's rated daily output with a distiller's four hours per gallon.
    • You want no drain water: the Waterwise 4000 distiller is air-cooled by a fan.
    • You want a specific contaminant reduced: check the NSF/ANSI 58 or NSF/ANSI 62 certified claim.
    💡 Editor's Pick

    Tired of four-hour distiller batches? The USWF RO-2F-600 is a tankless under-sink RO system rated for 600 gallons per day.

    See the RO-2F-600 →

    Frequently Asked Questions

    Is reverse osmosis water distilled water?

    No, reverse osmosis water is not distilled water, because it is made by pushing water through a semipermeable membrane instead of boiling and condensing it. Both are low-mineral, high-purity water. RO systems are certified under NSF/ANSI 58, while distillers are certified under NSF/ANSI 62.

    Can I use reverse osmosis water in a CPAP machine?

    Use the water your CPAP maker names, which is distilled water for Philips and ResMed. The Philips DreamStation 2 instructions say to use only room temperature distilled water in the humidifier tank, and ResMed recommends distilled water. Neither mentions RO water, so check your own CPAP manual.

    Can I put reverse osmosis water in a humidifier?

    You can put reverse osmosis water in a Honeywell humidifier if the RO system is properly maintained, because Honeywell accepts it. Honeywell still recommends distilled water first and says hard tap water is the usual source of white dust. Other brands may differ, so check your humidifier manual.

    Is distilled water purer than reverse osmosis water?

    Neither distilled water nor reverse osmosis water is purer in every respect, because each process can miss different things. Distillers leave dissolved solids behind but can carry VOCs over with the vapor, according to NSF, while certified RO must cut TDS by at least 75%.

    Does reverse osmosis water need a carbon filter like a distiller?

    Most reverse osmosis systems already include carbon stages, and distillers add a carbon filter because VOCs can travel over with the steam. NSF notes RO systems often have extra filters on either side of the membrane. A VOC reduction claim is optional under NSF/ANSI 58, so check the listing.


    Sources