Pentek C1 Comparable Carbon Block Water Filter by Tier1 - single - No Label

Pentek C1 Comparable Carbon Block Water Filter by Tier1 - Whole House Cartridges - 14.41 - DiscountFilterStore.com

Warranty Info

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

TIER1-C1

Pentek C1 Comparable Carbon Block Water Filter by Tier1

Name: Pentek C1 Comparable Carbon Block Water Filter by Tier1
Brand: Tier1
SKU: TIER1-C1
Price: 9.95 USD
Availability: InStock
Rating: 4.8 (31 reviews)

High Stock (211)

$9.95

Price Per Item
Single	$9.95
2 PACK	$8.94
4 PACK	$7.60
6 PACK	$7.53
24 PACK	$6.78

Fits into most industry standard 10-inch water filtration system housings

Choose a Pack Size:

Single

2 PACK

4 PACK

6 PACK

24 PACK

Carbon Impregnated Cellulose filter media helps capture particles 5 micron or larger
Ensures quality water throughout your home
Easy installation for a frustration-free return to better water

Features & Specs

Package Qty: 1

Manufacturer: Tier1

Manufacturer's Id: C1

UPC: 799932601415

Actual Size (in): 10 inches (length) x 2 1/2 inches (outside diameter)

Primary Filter Media: Carbon-Impregnated Fabric

Operating Temperature (°F): 40 - 125

Operating Temperature (°C): 4.4 - 51.7

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

Brand: Tier1

Advertised Size: 10 x 2-1/2

Length (in): 10 in

Outside Diameter (in): 2.5 in

Media Type: Carbon Filter

UPC's For Search: 799932601415 | 10051678002435 | 051678002438 | 0100047087300202 | 047087200459 | 10047087300200 | 20047087200453 | 047087300203

Country of Origin: China

Micron Rating Nominal: 5

Flow Rate (gpm): 5.0

Instructions

Turn off water supply. Press red pressure-relief button (if present)
Unscrew housing. Remove large o-ring, wipe clean and set aside
Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
Insert new filter cartridge
Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

Contaminants Reduced

Bad Taste and Odor

Chlorine Taste & Odor

Odor

Particles

Particles that can carry Odor

Sediment

Filter Life

Filter Life (months): 6 months

Warranty Info

Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

Prop65 warning applies to products that contain carbon media. Click here for more details

WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

Check Our Comparable Products

Frequently Asked Questions

What is the Tier1 C1 whole house carbon water filter and what does it replace?

The Tier1 C1 is a comparable replacement for the Pentek C1 whole house carbon filter. It is a 9-3/4" x 2-5/8" standard-size cartridge designed to fit most Big Blue-compatible and standard whole house housings. This carbon-impregnated cellulose cartridge reduces chlorine taste and odor, sediment, rust, and dirt from your entire home's water supply, making it an economical alternative to the OEM Pentek C1.

What is the micron rating and filtration capacity of the Tier1 C1 filter?

The Tier1 C1 features a 5-micron nominal rating, effectively capturing fine sediment along with chlorine taste and odor reduction. It has a service life of approximately 15,000 gallons or up to 3 months, whichever comes first. Replacement timing depends on your household water usage and incoming water quality—homes with higher chlorine levels or sediment may need more frequent replacements.

How often should I replace the Tier1 C1 carbon whole house filter?

For optimal performance, replace your Tier1 C1 every 3 months or after 15,000 gallons of use. Signs that indicate it's time for replacement include a noticeable return of chlorine taste or odor, reduced water pressure throughout the home, or visible discoloration of the cartridge. Consistent replacement ensures your whole house filtration system continues delivering cleaner, better-tasting water to every tap.

Will the Tier1 C1 fit my existing Pentek or standard whole house housing?

Yes, the Tier1 C1 is engineered with standard 9-3/4" x 2-5/8" dimensions, making it compatible with Pentek housings designed for the C1 cartridge as well as most standard-size whole house filter housings from other manufacturers. Always verify your housing's inner cartridge specifications before ordering to ensure a proper fit and seal.

What contaminants does the Tier1 C1 carbon filter reduce?

The Tier1 C1 uses carbon-impregnated cellulose media to reduce chlorine taste and odor, sediment, rust particles, dirt, and other particulates down to 5 microns. This dual-action filtration protects downstream plumbing, appliances, and fixtures while improving the overall taste and smell of water throughout your home. For enhanced contaminant removal like VOCs or heavy metals, consider pairing it with a specialized post-filter.

Pentek C1 Comparable Carbon Block Water Filter by Tier1

Frequently Asked Questions

TIER1-C1 is comparable with the following part number(s)

Customers Also Purchased

	Pentek C1 Comparable Carbon Block Water Filter by Tier1From $9.95	Pentek C1 Undersink Water Filter Replacement CartridgeFrom $12.88
Product Price	$9.95	$12.88
Product SKU	TIER1-C1	PENTEK-C1
Filter Life (months)	6 months	6 months
Primary Filter Media	Carbon-Impregnated Fabric	Carbon-Impregnated Cellulose
Micron Rating (Nominal)	5	5
Actual Size (in)	10 inches (length) x 2 1/2 inches (outside diameter)	9 3/4 inches (length) x 2 1/2 inches (outside diameter)
Country of Manufacture	China	China