PENTEK-DGD-2501-20
DGD-2501-20 Pentek Whole House Replacement Sediment Filter Cartridge
Low Stock (2)
$34.95 - $738.14
Fits most housings that accept 20-inch x 4.5-inch water filter cartridges
| Price Per Item | |
|---|---|
| 2 PACK | $33.90 |
| 4 PACK | $32.85 |
| 6 PACK | $31.80 |
| 24 PACK | $30.75 |
Features & Specs
Features & Specs
Package Qty: 1
Manufacturer: Pentair Water
Manufacturer's Id: DGD-2501-20
UPC: 051678360439
Actual Size (in): 20 inches (length) x 4-1/2 inches (outside diameter)
Media: Spun Wound Polypropylene
Primary Filter Media: Polypropylene
Operating Temperature (°F): 40 - 145
Operating Temperature (°C): 4.4 - 62.8
Brand: Pentek
Advertised Size: 20 x 4-1/2
Length (in): 20 in
Outside Diameter (in): 4.5 in
Width (in): 4.5 in
Media Type: Sediment Filter
Country of Origin: China
Micron Rating Nominal: 1
Flow Rate (gpm): 20.0
Includes: One Dual Gradient Density Pentek DGD-2501-20 Sediment Water Filter
Instructions
Instructions- Turn off water supply. Press red pressure-relief button (if present).
- Unscrew housing. Remove large o-ring, wipe clean and set aside.
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
- Insert new filter cartridge.
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.
Downloads
Downloads
Certifications
Certifications
Contaminants Reduced
Contaminants Reduced
Filter Life
Filter Life
Filter Life (gallons): 8,000
Filter Life (months): 6 months
The Pentek DGD-2501-20 Sediment Water Filter is dual gradient meaning the outer layer acts as a pre-filter, filtering out larger particles than the inner layer of the filter. The outer layer is a 25 micron filter and the inner layer filters down to 1 micron, reducing very fine sediment--prolonging the useful life of the cartridge by filtering more efficiently. High quality construction and durability make these filters perfect for a variety of applications. These filters are a great value for various applications, on both city and well water.
PENTEK-DGD-2501-20 is comparable with the following part number(s)
- 155360-43
- DGD-2501-20
- FPMB-BB1-20
- P1-20BB
- SDC-45-2001
- SDF-45-2001
 |  |  | |
|---|---|---|---|
Product Price |
$34.95
|
$18.97
|
$19.85
|
Product SKU |
PENTEK-DGD-2501-20
|
TIER1-DGD1-20BB
|
USWF-MB1-2045
|
Filter Life (months) |
|
|
|
Primary Filter Media |
|
|
|
Micron Rating (Nominal) |
|
|
|
Actual Size (in) |
|
|
|
Country of Manufacture |
|
|
|