Refrigerator Filters
  • Whole House Filtration
  • Air Filters
  • Water Filters
  • PENTEK-P5

    P5 Pentek Whole House Replacement Sediment Filter Cartridge

    Fits most housings that accept standard 10-inch x 2.5-inch water filter cartridges
    Price Per Item
    2 PACK $6.10
    4 PACK $5.91
    6 PACK $5.72
    24 PACK $5.53
    Choose a Pack Size:
    • Manufactured from pure 100% spun-bonded polypropylene

    • Constructed with true gradient density from outer to inner surfaces

    • Resistant to chemicals and corrosion

    • Materials tested and certified by NSF International to NSF/ANSI Standard 43

    format_list_bulleted Features & Specs
    Package Qty: 1
    Manufacturer: Pentair Water
    Manufacturer's Id: P5
    UPC: 051678014431
    Actual Size (in): 9 3/4 inches (length) x 2 3/8 inches (outside diameter)
    Media: Spun Wound Polypropylene
    Primary Filter Media: Polypropylene
    Operating Temperature (°F): 40 - 145
    Operating Temperature (°C): 4.4 - 62.8
    Brand: Pentek
    Advertised Size: 10 x 2-1/2
    Length (in): 9.75 in
    Outside Diameter (in): 2.38 in
    Width (in): 2.38 in
    Media Type: Sediment Filter
    Country of Origin: China
    Micron Rating Nominal: 5
    Flow Rate (gpm): 5.0
    Includes: One 9-3/4 x 2-3/8 Inch Pentek P5 Sediment Water Filter
    description Instructions
    1. Turn off water supply. Press red pressure-relief button (if present).
    2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
    3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
    4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
    5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
    6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
    7. Insert new filter cartridge.
    8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
    9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.
    file_download Downloads
    workspace_premium Certifications
  • Tested and Certified by NSF International against NSF/ANSI Standard 42 for materials and structural integrity requirements only
  • warning_amber Contaminants Reduced
  • Dirt Sand Sediment
  • Particulates
  • Rust And Corrosion
  • Sand
  • Sediment
  • Silt
  • filter_alt Filter Life
    Filter Life (gallons): 8,000
    Filter Life (months): 2 months
    warning

    Prop65 warning applies to products that contain carbon media. Click here for more details

    WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov


    The Pentek P5 Polypropylene Sediment Filter is a 5 micron filter for cleaner, improved water. The P5 reduces dirt, sand, rust particles, and scale particles. The highly durable P5 filter can be used in either city or well water.


    PENTEK-P5   is comparable with the following part number(s)

    • 9547
    • 9577
    • 9591
    • 9747
    • 12461
    • 13110
    • 17367
    • 173884
    • 1227867
    • 155014-52
    • 529-286
    • 55410-14
    • 55410-15
    • 55410-16
    • AP110
    • K00173
    • W5P
    • WHCF-DWHV
    • WHCF-GD05
    • WHKF-DWHV
    • WHKF-GD05
    • 155014-43
     
    {"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"medium","triggerOffsetX":40,"triggerOffsetY":100,"mobile":{"triggerSize":"small","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":20,"triggerOffsetY":105,"triggerRadius":"50%"}}