X

Save with Auto-Ship

Get the product you need, exactly when you need it, delivered right to your door. No more searching for the right part number, we've got you covered. Plus, you'll save $$ on every order and shipping is on us. Learn more

Save Money

Free Shipping*

Choose Frequency

*Free Shipping available in the contiguous US

Search
My Cart
My Cart Checkout
Search
Free Shipping on Orders Over $59* | Easy Returns | No Worries Guarantee | Contact Us | 1-800-277-3458

DGD-7525-20 Pentek Whole House Replacement Sediment Filter Cartridge

SKU
PENTEK-DGD-7525-20
main product photo
Price $39.99 List Price Price $56.99 Save 29%
Availability: In Stock
Fits most housings that accept 20-inch x 4.5-inch water filter cartridges
Choose a quantity
  • 1Filter$39.99 
  • 6Filters Price $35.99 each
  • Reduces the need for multiple housing step-down filtration systems
  • Filters extra-fine dirt, sand, sediment, silt, rust particles, and scale particles effectively
  • Bacteria resistant and chemical resistant
  • 3 times the dirt-holding capacity of similar sized sediment water filters
› See more product details
Save $16.00 with a Tier1 Brand
Comparable Filter
View Filter Value Comparison
Shipping
Return Policy
  • Reduces the need for multiple housing step-down filtration systems
  • Filters extra-fine dirt, sand, sediment, silt, rust particles, and scale particles effectively
  • Bacteria resistant and chemical resistant
  • 3 times the dirt-holding capacity of similar sized sediment water filters
Save $16.00 with a Tier1 Brand
Comparable Filter
View Filter Value Comparison
The Pentek DGD-7525-20 Sediment Water Filter is dual gradient, meaning the outer layer acts as a pre-filter, filtering out larger particles than the inner layer of the filter. The outer layer is a 75 micron filter and the inner layer filters down to 25 micron, reducing smaller sediment--prolonging the useful life of the cartridge by filtering more efficiently. High quality construction and durability make these filters perfect for a variety of applications. These filters are a great value for various applications, on both city and well water.
More Information
Package Qty 1
Used In Brands Ametek, Culligan, Pentek, US Filter
Manufacturer's Id DGD-7525-20
UPC 051678356432
Advertised Size (in) 20 x 4-1/2
Actual Size (in) 20 inches (Length) x 4-1/2 inches (Outside Diameter)
Actual Size (cm) 50.8 x 11.43
Outside Diameter (inches) 4.5
Media Spun Wound Polypropylene
Primary Filter Media Polypropylene
Filter Life (gallons) 8,000
Filter Life (liters) 30,283.28
Filter Life (months) 6 months
Micron Rating (Nominal) 25
Operating Temperature (°F) 40 - 145
Operating Temperature (°C) 4.4 - 62.8
Flow Rate (gpm) The flow rate is a measure of many gallons per minute can flow through the unit. This value is the maximum recommended gpm for the unit.x The flow rate is a measure of many gallons per minute can flow through the unit. This value is the maximum recommended gpm for the unit.x 20
Flow Rate (lpm) 75.708
Color White
Country of Manufacture China
Certifications NSF/ANSI Standard 42
Includes One Pentek DGD-7525-20 20 x 4.5 inch Sediment Water Filter
Additional Information Pre-Filter Rating: 75 Microns, Post-Filter Rating: 25 Micron

User Guide

    pentek-dgd-7525-20-user-guide.pdf

Instructions

  1. Turn off water supply. Press red pressure-relief button (if present).
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
  3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
  4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
  6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
  7. Insert new filter cartridge.
  8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
  9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.